Cutters, Crimpers & Strippers

For crush-free cutting of ribbon cable up to 2 3/16" (56 mm) widthExchangeable cutting base with fence angle for rectangular cutsWith opening spring and locking leverStandard trapezoidal blade, replaceableReplacement blade part number 94 19 215Handles...

High leverage cutting edges for cutting soft, hard and piano wireHigh cutting capacity with minimal effort due to optimum coordination of cutting edge angle and transmission ratioCutting edge hardness (approx. 64 HRC)Cutting capacity - up to 5/32" for...

Precision pliers for ultra fine cutting work in electronics and fine mechanicsVery precisely ground and sharp cutting edges with very small bevels for precise cutting work on small electronic componentsCutting edge hardness (approx. 64 HRC)Approx. 20%...

Crimping die for non-insulated butt connectorsCapacity - 1.5 to 4.0 mm² and 16 to 8 AWG

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous use1000V multi-component grips, VDE-testedHigh cutting performance with minimum effort due to optimum...

Spare cutter head for 95 71 445Cutter head is made of high-grade special tool steel, multi stage oil-hardenedAngular cutting blades prevent fanning out

Stripping tool to remove primary coating of fiber optic cables with Ø 0.125 mmAdjustable length stop for 5 - 45 mm, great for repetitive work to ensure same length of strippingBlade diameter 0.16 mm and hole for cable feed 0.35 mmHousing made of durable...

Precision pliers for ultra fine cutting work in electronics and fine mechanicsVery precisely ground and sharp cutting edges with very small bevels for precise cutting work on small electronic componentsCutting edge hardness (approx. 64 HRC)Approx. 20%...

For very tough, continuous useHigh cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratioPrecision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for...

Crimping die for D Sub, HD20 and HDE plugCapacity - 0.03 to 0.56 mm² and 32 to 20 AWG

Designed for cutting tire cord, wire rope and cableCompact size, lightweight, high performance levelIncludes thumb lock and opening springFor cutting tire cord, wire rope and cable up to 5/64" (2.0 mm)Box joint design for greater stabilityCuts cleanly...

1 pair of spare blades for 12 50 200Suitable for 14 - 6 AWGBlades are made of special tool steel, oil-hardened

Precision pliers for ultra fine cutting work in electronics and fine mechanicsGround, very sharp cutting edges without bevel for flush cutting perfect for cable tiesPrecision shaped tips cut wires resting on a board from 1/64" (0.2 mm) diameterJoint...

This wire rope cutter offers powerful cutting in a compact sizeHigh transmission joint design makes cutting 20 % easierBox joint design for greater stabilityFor cutting high-strength wire ropes up to 5/32" (4 mm) and cable 3/16" (6 mm)At just 6 1/4"...

For very tough, continuous useHigh cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratioPrecision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for...

Crimping die for non-insulated terminals and plug connectorsCapacity - 16 and 25 mm² and 6 and 4 AWG

Spare blade pair kit for 12 52 195

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due to optimum coordination of the cutting edge angle and...

Multifunctional tool for working on NYM cable from 3 x 1.5 mm² to 5 x 2.5 mm² (cutting, stripping insulation); universal stripping area for both solid conductor cross-sections; reliable alignment of the cable in the stripping area due to V-shaped blade...

Crimping die for F-connectors for TV and satellite connectionsCapacity - SW 9/32", 21/64", 5/16" (7.0, 8.4 and 8.1 mm) and sleeve capacity - 19/64" and 3/8" (7.7 and 9.5 mm)