Hand Tools

The GEARWRENCH 18" Flexible Magnetic Pickup Tool features: Retrieve small ferrous metal parts easily; Nickel plated tool has a powerful permanent magnet; Shaft flexes to go around corners.

The GEARWRENCH Battery Terminal Puller features: Use puller to remove the battery terminal clamp without damaging the battery post; Works on corroded spring-type clamps; Loosen the clamp bolt, place...

The GEARWRENCH Exhaust and Tailpipe Cutter features: Cut pipes 3/4" to 3" and 19mm to 76mm in diameter; Fifteen blades effectively cut pipe so only 1/4 turn is needed for a complete cut; For single...

The GEARWRENCH Window Molding Remover features: Removes window molding clips on GM and Ford vehicles; Place jaw flat against glass; Locate clips and roll them out with tip, keeping jaw flat to glass.

The GEARWRENCH Battery Terminal Spreader and Cleaner features: Clean and spread battery cable terminals; Sharp teeth effectively clean corrosion from the clamp; Squeeze the handle to spread the clamp.

The GEARWRENCH Exhaust and Tailpipe Expander 1-1/2" to 2-1/2" features: Flare, shape and expand tailpipes to ensure a tight fit and prevent exhaust leaks; Turn handle to adjust the expander to the...

The GEARWRENCH All-Purpose Scraper and Sticker Remover features: Remove inspection stickers, dealer price labels and paint from glass; Tool locks into 3 operating positions to reach hard-to-get-at...

The GEARWRENCH Mini Tubing Cutter features: Cut thin-wall steel, plastic, copper and brass tubing; Make cuts from 1/8" to 5/8" in diameter; Two rollers provide burr-free cut.

The GEARWRENCH Disc Brake Lining Wear Gauge features: Gauge measures brake lining remaining on bonded pads in 1/32" graduations; Tool checks measurement without removing caliper; Insert tips between...

The GEARWRENCH Three-Way Battery Tool features: Sharp steel blades remove corrosion and put a correct angle on terminal posts; Use the 8-Blade tapered reamer to quickly clean terminal clamps; Post...

The Pass-Thru™ socket and ratchet system by GEARWRENCH was designed to improve productivity and access on every job. The GearRatchet™ ratchets need as little as 5° to move fasteners vs. 30° for...

The GEARWRENCH 12" Tie Rod Separator features: Powerful tool separates tie rods; Insert 21/32" opening between parts and strike with hammer to separate; Separator is forged to withstand hard usage.

The GEARWRENCH Pitman Arm Puller features: Puller removes full-size pitman arms; Mount jaws over pitman arm and turn center screw with wrench until tight; Strike center screw with hammer to release...

BRSH WIRE CUP 2

The GEARWRENCH Heavy-Duty Oil Filter Wrench 3-3/4" to 4-1/2" features: Wrenches are designed for high torque requirements of truck filters; Designed for use with a 1/2" square drive tool; 1-1/2" wide...

The GEARWRENCH Wide Heavy-Duty Oil Filter Wrench 4-1/8" to 4-1/2" features: Extra wide 3” band for better grip and reduced canister damage; Designed for use with a 1/2" square drive tool; Wrenches...

The GEARWRENCH Heavy-Duty Oil Filter Wrench 4-1/2" to 5-1/4" features: Wrenches are designed for high torque requirements of truck filters; Designed for use with a 1/2" square drive tool; 1-1/2" wide...

The GEARWRENCH Wide Heavy-Duty Oil Filter Wrench 4-3/8" to 5-1/4" features: Extra wide 3” band for better grip and reduced canister damage; Designed for use with a 1/2" square drive tool; Wrenches...

The GEARWRENCH Heavy-Duty Oil Filter Wrench 5-1/4" to 5-3/4" features: Wrenches are designed for high torque requirements of truck filters; Designed for use with a 1/2" square drive tool; 1-1/2" wide...

The GEARWRENCH Wide Heavy-Duty Oil Filter Wrench 4-3/4" to 5-1/2" features: Extra wide 3” band for better grip and reduced canister damage; Designed for use with a 1/2" square drive tool; Wrenches...