Tools

T handle provides easier access to hard to reach areas and better gripFor widths across the flats at 22 mm1000V plastic dippedSpecial tool steel; oil-hardened

Locator for 97 49 65 Solar connector MC3

High leverage cutting edges for cutting soft, hard and piano wireHigh cutting capacity with minimal effort due to optimum coordination of cutting edge angle and transmission ratioCutting edge hardness (approx. 64 HRC)Cutting capacity - up to 5/32" for...

Offset design for easier access and allows for vertical positioning over bolt headFor widths across the flats at 24 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardenedFor widths across the flats at 3/4"

Solar connectors (Huber and Suhner)Capacity - 2.5 and 4.0 mm²

Offset design for easier access and allows for vertical positioning over bolt headFor widths across the flats at 9 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardened

Precision external circlip pliers for installing or removing circlips on shaftsOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting snap rings on shafts, ranging from 1 37/64" - 3...

Precision internal circlip pliers for installing or removing circlips in bore holesOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting snap rings into bores, ranging from 1 37/64"- 3...

Crimping die for turned contacts (HTS and Harting)Capacity - 0.14 to 4.0 mm² and 26 to 12 AWG

Jaw angled 15˚For widths across the flats at 27 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardened

Precision internal circlip pliers for installing or removing circlips in bore holesOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting snap rings into bores, ranging from 5/16"-1/2"Inserted...

Spare blades, moveable for 95 32 100Blade is made of special quality, high-grade tool steel, oil-hardened

Jaw angled 15˚For widths across the flats at 18 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardened

Spare blades for 90 20 185

Hex socket 1/2" drive for metric internal hexagonal socket screws6-point design for less slipping and rounding of cornersFor widths across flats 5 mm1000V plastic dippedChrome plated special tool steel

Spare tips for 46 10 A5Replaceable straight tips made of tempered steel

More output and comfort compared to conventional water pump pliers of the same lengthOffers 9 adjustment positions for 30% more gripping capacityGood access to the workpiece due to slim size in the head and joint areaSelf-locking on pipes and nuts means...

Hex socket 1/2" drive for metric hexagonal head screws6-point design for less slipping and rounding of cornersFor widths across flats 22 mm1000V plastic dippedChrome plated chrome vanadium steel

Internal circlip pliers for installing or removing circlips in bore holesFor fitting snap rings into bores ranging from 1 37/64" - 3 15/16"Solid style, forgedNon-slip, 45˚ angled solid tipsTips are forged as one part of the toolPliers body and tips:...

Good access to the workpiece due to slim size of head and joint areaMore output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 % more gripping capacitySelf-locking on pipes and nuts: no...