Tools

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due to optimum coordination of the cutting edge angle and...

Includes 1 each of: Screw Extractor Double Edged Size 1 (9R 471 001 3), Screw Extractor Double Edged Size 2 (9R 471 002 3), Screw Extractor Double Edged Size 3 (9R 471 003 3)

Locator for 97 49 66 Solar connector MC4

T handle provides easier access to hard to reach areas and better gripFor widths across the flats at 22 mm1000V plastic dippedSpecial tool steel; oil-hardened

Locator for 97 49 65 Solar connector MC3

High leverage cutting edges for cutting soft, hard and piano wireHigh cutting capacity with minimal effort due to optimum coordination of cutting edge angle and transmission ratioCutting edge hardness (approx. 64 HRC)Cutting capacity - up to 5/32" for...

Offset design for easier access and allows for vertical positioning over bolt headFor widths across the flats at 24 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardenedFor widths across the flats at 3/4"

Solar connectors (Huber and Suhner)Capacity - 2.5 and 4.0 mm²

Includes 1 each of: 8" Crimp System Master Pliers (97 43 200), Solar Connectors-Tyco (97 49 68)

Offset design for easier access and allows for vertical positioning over bolt headFor widths across the flats at 9 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardened

Precision external circlip pliers for installing or removing circlips on shaftsOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting snap rings on shafts, ranging from 1 37/64" - 3...

Includes 1 each of: 8" Crimp System Master Pliers (97 43 200), Solar Connectors-Hirshmann (97 49 67)

Precision internal circlip pliers for installing or removing circlips in bore holesOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting snap rings into bores, ranging from 1 37/64"- 3...

Crimping die for turned contacts (HTS and Harting)Capacity - 0.14 to 4.0 mm² and 26 to 12 AWG

Includes 1 each of: 8" Crimp System Master Pliers (97 43 200), Solar Connectors MC4 (97 49 66), 1 Locator For 97 49 66 (97 49 66 1)

Jaw angled 15˚For widths across the flats at 27 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardened

Precision internal circlip pliers for installing or removing circlips in bore holesOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting snap rings into bores, ranging from 5/16"-1/2"Inserted...

Spare blades, moveable for 95 32 100Blade is made of special quality, high-grade tool steel, oil-hardened

Jaw angled 15˚For widths across the flats at 18 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardened