Tools

Hard bits for recessed TORX® screws. Drive: 4 mm halfmoon for direct power tool connection.

6-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Partially Lasertip: the tip literally...

High quality bits with reduced shaft diameter for low-lying screw connections, enabling countersinking of screws without any surface damage. Profiled version. Extra-hard. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.

High quality bits for Phillips screws. Extra-hard titanium nitride (TiN) coating for withstanding permanent loads such as e.g. in industrial applications. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

This cutting, stripping, and crimping tool cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire with built-in, knife-type wire cutter Wire Stripper cleanly shears machine screws Measures machine screw sizes and gauges wire sizes Crimps insulated...

Wire Strippers with 2 wire cutters; one at tip, the other halfway back near stripping holes double the utility of this toolMulti Tool crimps 7 - 8mm insulated and non-insulated terminals, lugs and splicesCleanly shears 4-40, 10-24, 10-32, 8-32 and 6-32...

Wire Stripper strips 10-20 AWG solid, 12-22 AWG stranded wireMulti Tool crimps insulated and non-insulated connectorsTip designed to grab, pull and bend the smallest of wiresReinforced head reduces flex; optimized for ideal leverage when stripping and...

Cuts, strips, loops and bends 10-20 AWG solid and 12-22 AWG stranded wireShear-type cutting for clean cutsSerrated nose jaws to bend, shape, or pull wire; holes for looping wire endsSpring-loaded for self-opening action and comfortable, plastic-covered...

Wire Stripper strips 10-26 AWG solid and 12-28 AWG stranded wireMulti Tool crimps 10-22 AWG insulated and non-insulated terminalsCrimps B connectors and Scotchlok® IDC connectorsReinforced head reduces flexMade in USA

Cuts, strips, loops and gauges 10-18 AWG solid wireSpring-loaded action for self-openingEasy-to-read wire gauge markings on both sides for stripping in either directionHardened steel with precision ground stripping holes and wire looping and bending...

Individually tested to meet or exceed ASTM F1505-16 and IEC 60900:2018 standards for insulated toolsClearly marked with the official 1000-volt rating symbolCuts, strips, loops and gauges solid wireStrips 10-18 AWG solid wireMade in USA

Individually dielectrically testedGauges, cuts, strips, and loops stranded wireSpring-loaded for self-openingCompact, lightweight wire-stripping, cutting tool with narrow nose that fits into tight placesMade in USA

Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 screwsPrecision ground stripping holesStrong-gripping serrated nose for easy bending, shaping, and pulling of wireHoles for looping and bending wireMade...

Individually tested to meet or exceed ASTM F1505-16 and IEC 60900:2018 standards for insulated toolsCuts, strips and loops both 10-18 solid and 12-20 stranded AWG wire and cleanly shears 6-32 and 8-32 screwsSpring-loaded action for self-openingHardened...

Insulated Wire Stripper/Cutter is individually tested to meet or exceed ASTM F1505-16(2021) and IEC 60900:2018 standards for insulated toolsThick multi-layer grip design provides protection against electric shockCuts, strips, and loops both 10-18 solid...

Cuts, strips and loops 20-30 AWG Solid and 22-32 AWG Stranded wire and cleanly shears 6-32 and 8-32 screwsPrecision ground stripping holesStrong-gripping serrated nose for easy bending, shaping, and pulling of wireHoles for looping and bending wireMade...

Wire Stripper with stripping head that adjusts to strip: 10-20 AWG solid, 12-22 AWG stranded, and 12/2 and 14/2 Romex® cable (all sizes) and other nonmetallic (type NM) sheathed cable Adjustable stopper to control the length of the core...

Individually tested to meet or exceed ASTM F1505-10, IEC 60900: 2004, CAN/ULC-60900-09, NFPA 70E, 2012 ed., CSA Z462 for insulated toolTwo layers of insulation provide protection against electric shockQuickly installs and removes spring-tension hose...

1000 V Rated for safety on the job. VDE CertifiedUnique three-part insulation with white underlayer provides a warning sign that insulation may be compromisedMulti-color, sleek design with small thumbguards for ease of handling and easy storage in your...

Interchangeable insulated blades with a slim-tip to fit tight terminal blocksIncludes 2 single-ended blades: #2 Phillips and 1/4-Inch SlottedSingle-ended blades have 5.75-Inch shaft length out of handleUsed with Klein insulated handle, blades have a...