Tools

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3.

High quality bits for square socket screws with holding function. The wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. ¼" hexagon, suitable for holders as per DIN ISO...

High quality bits for square socket screws with holding function. The wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. ¼" hexagon, suitable for holders as per DIN ISO...

ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments...

Interchangeable soft-face heads out of semi-hard urethane for car body, engineering and automotive applications.

BiTorsion bits for hexagon screws with elastic torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases the product life...

Premium bits for Phillips screws. Tough, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-F 6.3.

Interchangeable soft-face heads out of semi-hard urethane for car body, engineering and automotive applications.

BiTorsion bits for hexagon screws with elastic torsion zone into which kinetic energy is dissipated during peak loads. With softer BiTorsion zone to prevent the bit tip from twisting at high loads. This significantly increases the product life...

Premium Wera insert wrench screwdriver with hollow shaft for screwdriving on thread rods, because only then can the thread rod penetrate through the bolt into the hollow shaft of the screwdriver. Multi-component Kraftform handle for high working speeds...

Wera soft-face hammers. Double-sided conical design for a secure, inseparable connection between the hammer handle and head. The hammer head is made out of nylon; the handle out of high quality ash wood. Diverse applications thanks to the interchangeable...

Hex socket 1/2" drive for metric hexagonal head screws6-point design for less slipping and rounding of cornersFor widths across flats 10 mm1000V plastic dippedChrome plated chrome vanadium steel

Spare blade for 16 40 150Replaceable blade can be used on both sides

Crimp system pliers for non-insulated open plug-type connectors (3/16" and 1/4" connector width)Just one tool for almost 1,000 crimping applicationsParallel crimping die movementRepetitive, high crimping quality due to precision dies and integral lock...

Offset design for easier access and allows for vertical positioning over bolt headFor widths across the flats at 16 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardenedFor widths across the flats at 17 mm

Pivot cutter repair kit for 95 32 340 SR US

Hex socket 1/2" drive for metric hexagonal head screws12-point design for less slipping and rounding of cornersFor widths across flats 9/16"1000V plastic dippedChrome plated chrome vanadium steel

Replacement cutting head for 71 72 910Blades are made of chrome vanadium heavy-duty steel, forged and oil-hardened

Crimping pliers with changer magazine - contains (3) of the most common crimping diesCrimping Pliers with round magazine and three interchangeable crimping dies for: - non-insulated open plug-type connectors (4.8 + 6.3 mm width) from 1/64-15/64" (0.5 -...

Features sharp, precisely aligned cutting edges for soft, hard and piano wireCutting edges hardness (approx. 63 HRC)Lap jointCutting capacity - up to 1/8" for soft, up to 1/16" for medium, up to 1/16" for hard and up to 1/32" for piano wireVanadium...