Tools

This wire rope cutter offers powerful cutting in a compact sizeHigh transmission joint design makes cutting 20 % easierBox joint design for greater stabilityFor cutting high-strength wire ropes up to 5/32" (4 mm) and cable 3/16" (6 mm)At just 6 1/4" (160...

Gripping zones for flat and round material for a variety of usesCutting edges for soft and hard wireLong cutting edges for thicker cablesCutting edge hardness (approx. 60 HRC)Special tool steel; forged, multi stage oil-hardened

Stainless steelStraight tipsNeedle-point tipsSmooth gripping surfaceSmooth handlesFor use in the electronics and precision engineering industriesVery good corrosion resistance to many corrosive materials80% anti-magneticESD tested, black epoxy resin...

For locking systems in electrical engineering, the supply of gas and water, air conditioning and ventilation systems, industry, technical installations in buildings, etc.With bit adapter for 1/4" bits with magnetFour different zinc die-cast key profiles...

Precision external circlip pliers for installing or removing circlips on shaftsFor fitting snap rings on shafts, ranging from 3/4" - 2 23/64"Inserted straight tips for reliable workCirclips are held securely, large contact faces and the position of the...

1 replacement push-button set for 87 XX 560

Precision pliers for assembly work, bending and adjusting workExtra long jaws; length of 2 11/64" (55 mm) for hard to reach areasSmooth gripping surfaces and edgesChrome vanadium electric steel, forged, oil-hardened

Replaces a full set of inch and metric open end wrenches up to 3 3/8" (85 mm)Excellent for gripping, holding, pressing and bending applicationsOptimized adjustment to the workpiece with hand-friendly position of gripsReliable catching of the hinge bolt:...

Exceptional cutting performance: 60% less effort compared to conventional high leverage diagonal cuttersInduction hardened cutting edges (approx. 64 HRC) for cutting soft, hard and piano wireCuts materials like bolts, nails, rivets, etc. up to 1/4" (6.0...

Gripping zones for flat and round material for a variety of usesCutting edges for soft and hard wireLong cutting edges for thicker cablesCutting edge hardness (approx. 60 HRC)Special tool steel; forged, multi stage oil-hardenedSpecial tool steel; forged,...

For locking systems in electrical engineering, the supply of gas and water, air conditioning and ventilation systems, industry, technical installations in buildings, etc.9 different die-cast zinc key profiles in 1 toolConstruction version with plug-in,...

Adjustment at the touch of a button directly on the workpieceFine adjustment for optimum adaptation to different size workpieces and a comfortable gripping positionSelf-locking on pipes and nuts: no slipping off the workpiece and low handforce...

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due to optimum coordination of the cutting edge angle and...

Precision external circlip pliers for installing or removing circlips on shaftsFor fitting snap rings on shafts, ranging from 25/64" - 1"Inserted straight tips for reliable workCirclips are held securely, large contact faces and the position of the tips...

Heavy duty and wear resistingDifferent jaw stylesLong, half-round jawsChrome vanadium electric steel, forged, oil-hardened

Exceptional cutting performance: 60% less effort compared to conventional high leverage diagonal cuttersInduction hardened cutting edges (approx. 64 HRC) for cutting soft, hard and piano wireCuts materials like bolts, nails, rivets, etc. up to 1/4" (6.0...

Replaces a full set of inch and metric open end wrenches up to 2 1/2" (68 mm)Smooth jaws for damage free installation of plated fittings - working directly on chromeAdjustable tightening toolExcellent for gripping, holding, pressing and bending...

35% less effort required than with conventional combination pliers due to high leverageCutting edge hardness (approx. 63 HRC) for heavy-duty cuttingEasier cutting, powerful gripping, bending and pullingLong cutting edges for thicker cablesGripping zones...

For locking systems in electrical engineering, the supply of gas and water, air conditioning and ventilation systems, industry, technical installations in buildings, etc.9 different die-cast zinc key profiles in 1 toolDetachable chain and snap hookTotal...

Precision external circlip pliers for installing or removing circlips on shaftsFor fitting snap rings on shafts, ranging from 1/8" - 25/64"Inserted straight tips for reliable workCirclips are held securely, large contact faces and the position of the...