Bits

Bits for Microstix® screws with 4 mm halfmoon drive for direct insertion in the power tool.

Tough Wera bits for Phillips screws, for universal use. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3.

Tough Wera bits for Phillips screws, for universal use. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers lager contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders...

Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers lager contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders...

Tough Wera bits for hexagonal socket screws, for universal use. Hex-Plus offers lager contact surfaces in the screw head. The notch effect is reduced to a minimum and the destruction of the screw is nearly eliminated. 1/4" hexagonal, suitable for holders...

High quality bits with 4 mm halfmoon drive. Optimised for Japanese PH screws. Hard design.

High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and...

High quality Wera bit for Phillips screws. It has a sharp-edged profile that ensures a dependable transfer of power between the bit and screw by breaking off the paint e.g. when screw profiles are covered in it. Extra-hard design: ¼" hexagon, suitable...

High quality Wera bit for Phillips screws. It has a sharp-edged profile that ensures a dependable transfer of power between the bit and screw by breaking off the paint e.g. when screw profiles are covered in it. Extra-hard design: ¼" hexagon, suitable...

High quality bits for Phillips screws, optimised for Asian PH screws. Similar to Camera screws. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

High quality bits for Phillips screws, optimised for Asian PH screws. Similar to JCIS 8-70. Tough viscous for universal use. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3.

Premium bits for TORX® socket screws. 1/4" hexagonal, suitable for holders as per DIN ISO 1173-D 6.3.

Premium bits for TORX® socket screws. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

Premium bits for TORX® socket screws. 1/4" hexagonal, suitable for holding tools as per DIN ISO 1173-D 6.3.

Hard bits for recessed TORX® screws. Drive: 4 mm halfmoon for direct power tool connection.

Hard bits against premature breakage. Drive: halfmoon, 4 mm.

High quality bits with 4 mm halfmoon drive. Optimised for Japanese PH screws. Hard design.

High quality bits with 4 mm halfmoon drive. Optimised for Japanese PH screws. Hard design.

High quality bits with reduced shaft diameter for low-lying screw connections, enabling countersinking of screws without any surface damage. Profiled version. Extra-hard. ¼" hexagon, suitable for holders as per DIN ISO 1173-F 6.3.