Cutters, Crimpers & Strippers

The CoBolt® cutters with reduced cutting edge hardness to allow more pressure on the sides of the cutting edges (e.g. for making fences)Induction hardened cutting edges (approx. 62 HRC) for cutting soft and hard wireCuts materials like bolts, nails,...

Exceptional cutting performance: 60% less effort compared to conventional high leverage diagonal cuttersInduction hardened cutting edges (approx. 64 HRC) for cutting soft, hard and piano wireCuts materials like bolts, nails, rivets, etc. up to 7/32" (5...

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due to optimum coordination of the cutting edge angle and...

Features sharp, precisely aligned cutting edges for soft, hard and piano wireCutting edges hardness (approx. 63 HRC)Lap jointLow-friction double spring for gentle and even openingCutting capacity - up to 3/32" for soft wire, up to 5/64" for medium, up...

For fine cutting work in electronics and fine mechanicsSturdy, zero-backlash box jointLow friction double spring for gentle and even openingThe mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by...

One tool that cuts and chamfers all common European drain pipe with diameters of 32, 40 and 50 mmReversible high-quality ball-bearing steel blade, can be easily replaced without toolsProvides a clean cut without the need to readjust or deburr the cut...

For cutting thin-walled plastic pipes and flexible hoses up to 1" outside diameter Features an opening spring and locking lever Replaceable blade part number 90 29 01 Not suitable for cutting cables Recess in base aligns the hose at a perfect right...

Spare blade for 94 15 215 and 94 35 215

Spare cutter head for 95 32 038Not suitable for steel wire and wire ropesPrecision ground, hardened blades

Crimping die for Non-insulated spade plug connectorsCapacity - 0.1 to 2.5 mm² and 26 to 14 AWG

Crimping die for spade connectors and non insulated open plug type connectors (plug width 6.3mm)Capacity - 1.25 to 2.5, 3.0 to 6.0 mm² and 14 to 10 AWG

Crimping die for modular plugsCapacity - 0.5 to 2.5 mm² and 20 to 14 AWG

Four mandrel crimping pliers for turned contactsFor crimping turned contactsCapacity - 0.14 to 6 mm² and 26 to 10 AWGFour-mandrel crimping for top-quality crimping connectionsMandrel gauge to check the basic settingRepetitive, high crimping quality due...

KNIPEX Twistor® T combines the features of a front and side crimper into 1 toolCrimp head can be freely rotated 360°, with 8 locking positionsEnd sleeves (ferrules) can be crimped from almost any working positionCreates a trapeziodal crimp profile, high...

Includes 12 40 200 (Self-Adjusting Wire Stripper 8-32 AWG) and 97 53 04 (Self-Adjusting Crimping Pliers For Wire Ferrules)Assortment contains some of the most common sizes of end sleeves0.5, 0.75, 1.0, 1.5 and 2.5mm² end sleeves - 200 each4 and 6 mm²...

Electronics Wire Stripping Shears, 5 1/2", Multi-Component

Form-fit stripping of both standard and difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber including multi-layer insulationsA second pair of blades hold the remaining insulation reliably in placeReplaceable...

Self-Adjusting Wire Stripper 6-14 AWG, 8", Bare Plastic

Automatic Flat Cable Stripper 0.75-2.5 mm2

End Cutting Nippers, 6 1/4", Plastic Coating, Polished