Cutters, Crimpers & Strippers

Cutting / Stripping / Crimping Tool includes a dedicated crimper with a wire stripper and two cuttersThis Wire Crimper strips 10-18 AWG stranded wire and crimps 10-22 AWG insulated and non-insulated terminals and connectorsSpecially hardened wire cutter...

Wire Stripper with six precision ground stripping holes for 8-18 AWG Solid and 10-20 AWG Stranded wireNarrower head geometry gets into hard to reach placesScrew shearing holes for 6-32 and 8-32 bolts and precision, shear-like blades that provide clean...

Electronics Wire Stripping Shears, 5 1/2", Multi-Component

Form-fit stripping of both standard and difficult-to-remove insulating materials made of PTFE, silicone, Radox®, Kapton® and rubber including multi-layer insulationsA second pair of blades hold the remaining insulation reliably in placeReplaceable...

Automatic Flat Cable Stripper 0.75-2.5 mm2

End Cutting Nippers, 6 1/4", Plastic Coating, Polished

Diagonal Cutters, 4 1/4", Plastic Coating

Diagonal Cutters, 5", Plastic Coating, Bevel Cut, Electronics

The essential tool for versatile useHigh-quality material and precise workmanship for long service lifePrecision cutting edges for soft and hard wireClean cutting of thin copper wires, even at the cutting edge tipsInduction hardened cutting edges (approx...

Exceptional cutting performance: 60% less effort compared to conventional high leverage diagonal cuttersInduction hardened cutting edges (approx. 64 HRC) for cutting soft, hard and piano wireCuts materials like bolts, nails, rivets, etc. up to 1/4" (6.0...

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due to optimum coordination of the cutting edge angle and...

Forged-on axle for heavy duty cuttingPrecision cutting edges for soft, hard and piano wireCuts thick wires with less effort than other diagonal cutters of the same lengthCutting edges are in the center of the cutter headHigh cutting performance with...

For fine cutting work in electronics and fine mechanicsSturdy, zero-backlash box jointLow friction double spring for gentle and even openingThe mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by...

Spare blades for 90 22 10 BKA BiX Pipe CutterIncludes 8 blades in a plastic caseBlades made of special surgical stainless steelMade in Solingen, GermanyBlade can easily be replaced by unthreading screw that holds the blade in place

For cutting and shortening cable ducts and for plastic material up to 5/32" (4.0 mm) thicknessIncludes opening spring and easy to use locking device that keeps the blades secure when not in useSpecial lever transmissionBlade is made of special tool...

For cutting cables, stripping wire and crimping insulated terminals and cable connectorsWith threaded holes for cutting copper and brass screws threaded 7/64", 1/8", 9/64", 5/32" and 13/64" (M2.6, M3, M3.5, M4 and M5)Bolted joint for higher stability and...

For cutting cables, stripping wire and crimping insulated terminals and cable connectorsWith threaded holes for cutting copper and brass screws threaded 7/64", 1/8", 9/64", 5/32" and 13/64" (M2.6, M3, M3.5, M4 and M5)Bolted joint for higher stability and...

For cutting cables, stripping wire and crimping insulated terminals, cable connectors and plug-type connectorsWith threaded holes for cutting copper and brass screws threaded 7/64", 1/8", 9/64", 5/32" and 13/64" (M2.6, M3, M3.5, M4 and M5)Bolted joint...

Crimping die for end sleeves - ferrulesCapacity - 0.25 to 6.0 mm² and 24 to 10 AWG

OPEN BARREL CONTACT CRIMP TOOL 24-14 AWG