Five of KNIPEX best-selling Pliers Wrenches in a custom tool roll pouchSize 5" - 12" tools for a gripping capacity up to 2 1/2"Tool roll is made of hard-wearing polyester fabricWith hook and loop fastenerReplaces a full set of inch and metric open end...

Stainless steelStraight tipsNeedle-point tipsSmooth gripping surfaceSmooth handlesFor use in the electronics and precision engineering industriesVery good corrosion resistance to many corrosive materials80% anti-magneticESD tested, black epoxy resin...

For locking systems in electrical engineering, the supply of gas and water, air conditioning and ventilation systems, industry, technical installations in buildings, etc.9 different die-cast zinc key profiles in 1 toolConstruction version with plug-in,...

For heating, air conditioning, sanitary and building engineeringWith bit insert: slot 3/64 x 9/32" and cross recess PH2With adapter for 1/4" bits on securing chainAdditional bit adapter for 1/4" bits in one armTotal length 3 1/2"Zinc die-casting

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due to optimum coordination of the cutting edge angle and...

For control cabinets and shut off systems in the supply of gas, water and electricityFor technical installations in buildings, e.g. air conditioning and ventilation systems, shut-off valves, main switchboards, etc.4 arm version - includes the following...

KN-7101-250 and KN-7101-250-SBA are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

For control cabinets and shut off systems in the supply of gas, water and electricityFor technical installations in buildings, e.g. air conditioning and ventilation systems, shut-off valves, main switchboards, etc.4 arm version - includes the following...

Three of KNIPEX best-selling pliers in one set in a plastic storage trayIncludes 1 each of: 8" Long Nose Pliers w/ Cutter (26 11 200), 8" High Leverage Angled Diagonal Cutters (74 21 200), 10" Cobra® Pliers (87 01 250)Plastic tray can be used in...

KN-7131-200SBA and KN-7131-200 are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

KN-7421-250SBA and KN-7421-250 are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

KN-8801-300SBA and KN-8801-300 are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

KN-7422-200SBA and KN-7422-200 are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

Cuts, strips, and loops 10-18 AWG Solid and 12-20 AWG Stranded wire and cleanly shears 6-32 and 8-32 screwsPrecision ground stripping holesStrong-gripping serrated nose for easy bending, shaping, and pulling of wireHoles for looping and bending wireMade...

3M 85113M PARTICULATE RESPIRATO3M PARTICULATE RESPIRATOR 8511 N95

3M 82003M PARTICULATE RESPIRATO3M PARTICULATE RESPIRATOR 8200 N95

RTV Blue Silicone Gasket Maker - Sensor Safe

Tungsten carbide tipped with positive rake teeth for high alloy and stainless steels, nonferrous metals and reinforced fabrics. Complete assembly with arbor and pilot drills. Recommended for use on sheet metal up to 1/8" (3mm) thick.

Tungsten carbide tipped with positive rake teeth for high alloy and stainless steels, nonferrous metals and reinforced fabrics. Complete assembly with arbor and pilot drills. Recommended for use on sheet metal up to 1/8" (3mm) thick.

Tube & Plug Assembly for 98-4.