Knipex

Spare tips for 46 20 A61Replaceable 90˚ tips made of tempered steel

UL Certified when used with KNIPEX crimping pliers (97 53 04, 97 53 08, 97 53 09, 97 53 14 and 97 43 200)Copper with an electro tin plated surfaceNon-insulated

KN-8551-180CSBA and KN-8551-180C are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item...

For holding insulation mats in placeWith integrated springFully insulated to reduce risk of short circuitConstructed of fiberglass reinforced plastic1000V insulated

Offset design for easier access and allows for vertical positioning over bolt headFor widths across the flats at 10 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardenedFor...

Spare set of blades for 97 51 12 and 97 51 13

Bolted joint for high precision and stress toleranceFor very precise assembly work in electronics and fine mechanicsSharp, ground cutting edges for soft, hard wire and piano wireCutting edge...

Crimping pliers for micro plugsFor crimping micro plugs D-Sub, HD 20 and HDE plugCapacity - 0.03 to 0.56 mm² and 32 to 20 AWGParallel crimping performance to satisfy the particularly high standards...

6 functions in one pliers - grips, cuts, strips, bends, crimps and deburrsCrimp die for end sleeves (ferrules) 0.5 to 2.5 mm²Suitable for stripping 0.75 to 1.5 mm² and 2.5 mm²Serrated gripping...

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due...

Crimping die for coax connectors - RG 58, 59, 62, 71 and 223Capacity - SW 7/32", 1/4", 1/16" (5.4, 6.48 and 1.72 mm) and sleeve capacity - 1/4", 19/64" and 5/64" (6.4, 7.6 and 2.1 mm)

Good access to the workpiece due to slim size of head and joint areaMore output and comfort compared to conventional water pump pliers of the same length: 9-notch adjustment positioning for 30 %...

Great for removing nailsHeavy-duty tool for long lifeCutting edge hardness (approx. 60 HRC)Cutting capacity - up to 3/32" medium hard materialSpecial tool steel; forged, oil-hardened

PlasticContains 5 plastic ESD tweezers in a tool roll7 compartment tool roll made of hard-wearing polyester fabricSmooth gripping surfaceContains one of each of the following tweezers: 92 09 01 ESD,...

Includes 1 each of: 10'' Spring Hose Clamp Pliers w/ Locking Device (85 51 250 AF) and 10'' Cobra® Hose Clampliers for Click Clamps (85 51 250 C)Rotatable tips for securely gripping the clamps in...

Precision internal circlip pliers for installing or removing circlips in bore holesOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting...

Crimping pliers for solder-free electrical connectionsFor crimping Coax, BNC and TNC connectorsThe lever transmission reduces the handforce up to 30 % compared with regular crimping...

Crimping die for non-insulated terminals and plug connectorsCapacity - 16 and 25 mm² and 6 and 4 AWG

Precision internal circlip pliers for installing or removing circlips in bore holesOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting...

Crimping die for F-connectors for TV and satellite connectionsCapacity - SW 9/32", 21/64", 5/16" (7.0, 8.4 and 8.1 mm) and sleeve capacity - 19/64" and 3/8" (7.7 and 9.5 mm)