Knipex

UL Certified when used with KNIPEX crimping pliers (97 53 04, 97 53 08, 97 53 09, 97 53 14 and 97 43 200)Copper with an electro tin plated surfaceYellow plastic collar

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due...

Precision internal circlip pliers for installing or removing circlips in bore holesOverexpansion limiter with screw stop prevents overexpansion of circlipsAdjustment using Allen WrenchFor fitting...

Multifunctional tool for working on NYM cable from 3 x 1.5 mm² to 5 x 2.5 mm² (cutting, stripping insulation); universal stripping area for both solid conductor cross-sections; reliable alignment of...

Crimping die for F-connectors for TV and satellite connectionsCapacity - SW 9/32", 21/64", 5/16" (7.0, 8.4 and 8.1 mm) and sleeve capacity - 19/64" and 3/8" (7.7 and 9.5 mm)

Suitable for fine gripping and cutting workPointed, half-round 45˚ angled jawsSerrated gripping surfacesCutting edges for soft, medium and hard wireCutting edges induction hardened (approx. 61...

Precision pliers for ultra fine cutting work in electronics and fine mechanicsGround, very sharp cutting edges without bevel for flush cutting perfect for cable tiesPrecision shaped tips cut wires...

For very precise assembly work, e.g. in electronics and fine mechanicsUsed for gripping, holding and bendingSmooth ground gripping surfacesApproximately 20% lighter than conventional electronics...

Great for removing nailsHeavy-duty tool for long lifeCutting edge hardness (approx. 60 HRC)Cutting capacity - up to 3/32" medium hard materialSpecial tool steel; forged, oil-hardened

Stainless steelContains 5 stainless steel ESD tweezers in a tool roll7 compartment tool roll made of hard-wearing polyester fabricSmooth gripping surfacesContains one of each of the following...

Crimping pliers for solder-free electrical connectionsFor crimping non-insulated open plug type connectorsCapacity - 0.5 to 6.0 mm² and 20 to 10 AWGThe lever transmission reduces the handforce up to...

Two of KNIPEX best-selling pliers in a belt pouchIncludes 1 each of: 6-1/4" Diagonal Cutter (74 01 160), 6" Cobra® Pliers (87 01 150)Made of durable polyester fabricIncludes sewn-in belt loop for...

Adjustment at the touch of a button directly on the workpieceFine adjustment for optimum adaptation to different size workpieces and a comfortable gripping positionSelf-locking on pipes and nuts: no...

Spare blades block for 12 42 195Suitable for 32 - 8 AWGBlades are made of special tool steel, oil-hardened

UL Certified when used with KNIPEX crimping pliers (97 53 04, 97 53 08, 97 53 09, 97 53 14 and 97 43 200)Copper with an electro tin plated surfaceBlue plastic collar

Hex socket 1/2" drive for metric hexagonal head screws12-point design for less slipping and rounding of cornersFor widths across flats 1"1000V plastic dippedChrome plated chrome vanadium steel

T handle provides easier access to hard to reach areas and better gripFor widths across the flats at 13 mm1000V plastic dippedSpecial tool steel; oil-hardenedFor widths across the flats at 33/64"

For twisting and cutting wire in one operation: fast reliable and economicalPrecision and long service life make these the most widely purchased concreters' in the worldInduction hardened cutting...

Jaw angled 15˚For widths across the flats at 12 mm1000V plastic dippedChrome plated chrome vanadium steel; forged, oil-hardened