Knipex

SteelSpare stripping blades for 15 11 120For use in the electronics industryFor removing insulating coatings from wiresStrips 0.5 mm diameter wireMagnetic

1 replacement push-button set for 87 XX 560

Unique combination of front and side grippingFront jaw design grips stripped screwsOptimized side jaw with opposing teeth for maximum forceSide gripping jaws for round, square and hex materialsThe...

Precision pliers for assembly work, bending and adjusting workExtra long jaws; length of 2 11/64" (55 mm) for hard to reach areasSmooth gripping surfaces and edgesChrome vanadium electric steel,...

Replaces a full set of inch and metric open end wrenches up to 3 3/8" (85 mm)Excellent for gripping, holding, pressing and bending applicationsOptimized adjustment to the workpiece with hand-friendly...

Exceptional cutting performance: 60% less effort compared to conventional high leverage diagonal cuttersInduction hardened cutting edges (approx. 64 HRC) for cutting soft, hard and piano wireCuts...

Gripping zones for flat and round material for a variety of usesCutting edges for soft and hard wireLong cutting edges for thicker cablesCutting edge hardness (approx. 60 HRC)Special tool steel;...

For locking systems in electrical engineering, the supply of gas and water, air conditioning and ventilation systems, industry, technical installations in buildings, etc.9 different die-cast zinc key...

Adjustment at the touch of a button directly on the workpieceFine adjustment for optimum adaptation to different size workpieces and a comfortable gripping positionSelf-locking on pipes and nuts: no...

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous useHigh cutting performance with minimum effort due...

Precision external circlip pliers for installing or removing circlips on shaftsFor fitting snap rings on shafts, ranging from 25/64" - 1"Inserted straight tips for reliable workCirclips are held...

Cuts 6-32 and 8-32 screws without threadingLocating ridges - easy to locate stripping holes by using one of the locating ridgesStrips 10 to 20 AWG - both solid and stranded wireIntegrated opening...

Heavy duty and wear resistingDifferent jaw stylesLong, half-round jawsChrome vanadium electric steel, forged, oil-hardened

2 pairs of red plastic jaws for 81 11 250 and 81 13 250Made of plasticSimple to replace plastic jaws- just unthread screw, remove plastic jaw and reverse the process for replacement plastic jaw

Exceptional cutting performance: 60% less effort compared to conventional high leverage diagonal cuttersInduction hardened cutting edges (approx. 64 HRC) for cutting soft, hard and piano wireCuts...

Replaces a full set of inch and metric open end wrenches up to 2 1/2" (68 mm)Smooth jaws for damage free installation of plated fittings - working directly on chromeAdjustable tightening...

35% less effort required than with conventional combination pliers due to high leverageCutting edge hardness (approx. 63 HRC) for heavy-duty cuttingEasier cutting, powerful gripping, bending and...

For locking systems in electrical engineering, the supply of gas and water, air conditioning and ventilation systems, industry, technical installations in buildings, etc.9 different die-cast zinc key...

Precision external circlip pliers for installing or removing circlips on shaftsFor fitting snap rings on shafts, ranging from 1/8" - 25/64"Inserted straight tips for reliable workCirclips are held...

Cuts 6-32 and 8-32 screws without threadingLocating ridges - easy to locate stripping holes by using one of the locating ridgesStrips 10 to 20 AWG - both solid and stranded wireintegrated opening...