KTC

●The caliber uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . ●The rising angle is 45° x...

●One wrench can be used for 6 sizes (4.5, 5.1, 5.8, 6.1, 6.4, 6.6) and can be applied to most vehicles.

3/8in Sq. Hex. Bit Socket, 9mm

●This driver has a thicker and longer shaft for increased strength, and the shaft and handle are firmly fixed.

●Round-shaped grip suitable for pushing and turning so your palm won't hurt. ●The grip is lightweight, does not feel sticky, and is made of environmentally friendly material (elastomer). ●The...

● Uses AMBAC system (PAT.), a mechanism to prevent pins from falling out. ●Replacement pins and rings are available.

Wooden Grip Screwdriver, Cross Tip, Phillips #3 ●Uses natural wood that is easy on the hands. ●The shaft is a through type with a magnet at the tip.

●The caliber uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . ●The rising angle is 45° x...

●You can quickly turn with the spanner side and final tighten with the socket side. ●Since the socket side has a swing mechanism, you can apply strong force by bending the handle into an L shape,...

L-Shaped Ball Hex-Key Wrench Set (7Pcs.)

Wooden Grip Screwdriver, Cross Tip, Phillips #1 ●Uses natural wood that is easy on the hands. ●The shaft is a through type with a magnet at the tip.

1/2in Sq. Wobble Extension Bar, 270mm

T-Type Torx Driver, T6

● Uses AMBAC system (PAT.), a mechanism to prevent pins from falling out. ●Replacement pins and rings are available.

3/8in Sq. Screwdriver Type Handle

●One bit supports two sizes (cross No. 2 x 3, minus tip width 4 x 6). One-touch specification, just insert and remove. ●Uses a non-slip soft grip. ● The shaft is a hexagonal shaft (width across the...

3/8in Sq. T-Type Long Torx Bit Socket

1/2in Sq. T-Type Torx Bit Socket, T30

Carburetor Screwdriver (Flat), 3.5mm Width

1/2in Sq. Wobble Extension Bar, 100mm