Kukko

The 2-jaw universal puller with narrow, quickly adjustable jaws is used for the safe and user-friendly removal of bearings, gears, and discs in all common sizes for craft, workshop, and industry...

The 2-jaw universal puller is used for extracting bearings, gears, and discs in all common sizes for crafts, workshops, and industry. It can loosen any component that sits on a shaft and is freely...

The segment internal extractors of series 21-E are used for extracting flush-mounted bearings, bearing outer rings, sleeves, and seals in crafts, workshops, and industry. The segmented design with...

The supports of the series 22 are used together with the internal extractors of the series 21 in crafts, industry, and workshops. Supports are particularly well suited for large cylinder bushings and...

The mechanical pressure spindle is the heart of every KUKKO puller. It achieves a maximum pulling force of 10 t. The manual operation of the spindle allows for a sensitive control of the extraction...

The pass pin extractor of the series 223-2 is used for disassembling locking and dowel pins in crafts, industry, and workshops. The three jaws mounted in the chuck can be adjusted to the respective...

The internal extractors of the series 21 are used for pulling out internal bearings, bearing outer rings, and bushings in craftsmanship, workshops, and industry. The multi-shelled design of the...

The micro puller is used for removing speedometer cables, pressure gauges, clocks, and similar parts. Especially in model making, the small parts puller is a helpful and reliable tool. The handy and...

The side bolts with nut are spare parts for the separator devices of series 15. The side bolts are used for positioning and securing the separator jaws to the workpiece.

The 10-piece sliding hammer set in the case KS-22-01 is used for pulling bushings as well as components with threads (dowel pins, key profiles, bolts, etc.) in crafts, industry, and workshops. The...

The supports of the series 22 are used together with the internal extractors of the series 21 in crafts, industry, and workshops. Supports are particularly well suited for large cylinder bushings and...

The internal extractors of the series 21 are used for pulling out internal bearings, bearing outer rings, and bushings in craftsmanship, workshops, and industry. The multi-shelled design of the...

The thread insert set for sliding hammer or counter stays of series 22 is used to pull out parts with central threaded holes in crafts, industry, and workshops. The set includes six different threads...

The internal extractors of the series 21 are used for pulling out internal bearings, bearing outer rings, and bushings in craftsmanship, workshops, and industry. The multi-shelled design of the...

The single-blade mechanical nut splitter is used for splitting stuck, rusted, or over-tightened nuts with a tensile strength of up to 800 N/mm². During this splitting process, the threaded pin...

The single-blade mechanical nut splitter is used for splitting stuck, rusted, or over-tightened nuts with a tensile strength of up to 800 N/mm². During this splitting process, the threaded pin...

The accessories for “AXLE” Y-AP-75 are used together with it for the quick and problem-free pressing out and in of truck axle eye bolts in craftsmanship, industry, and workshops.

The accessories for “AXLE” Y-AP-75 are used together with it for the quick and problem-free pressing out and in of truck axle eye bolts in craftsmanship, industry, and workshops.

The multi-way puller set K-68-B is used for removing components with threaded holes. A power nut integrated into the crossbar allows for the application of force that would otherwise only be...

Thread adapters are spare parts that allow flexible connections between different threads, thereby providing more flexible application possibilities.