Tools

This cutting, stripping, and crimping tool cuts and strips 8-22 AWG solid and 10-26 AWG stranded wire with built-in, knife-type wire cutter Wire Stripper cleanly shears machine screws Measures...

Wire Strippers with 2 wire cutters; one at tip, the other halfway back near stripping holes double the utility of this toolMulti Tool crimps 7 - 8mm insulated and non-insulated terminals, lugs and...

Wire Stripper strips 10-20 AWG solid, 12-22 AWG stranded wireMulti Tool crimps insulated and non-insulated connectorsTip designed to grab, pull and bend the smallest of wiresReinforced head reduces...

Wire Stripper strips 10-26 AWG solid and 12-28 AWG stranded wireMulti Tool crimps 10-22 AWG insulated and non-insulated terminalsCrimps B connectors and Scotchlok® IDC connectorsReinforced head...

Individually dielectrically testedGauges, cuts, strips, and loops stranded wireSpring-loaded for self-openingCompact, lightweight wire-stripping, cutting tool with narrow nose that fits into tight...

Individually tested to meet or exceed ASTM F1505-16 and IEC 60900:2018 standards for insulated toolsCuts, strips and loops both 10-18 solid and 12-20 stranded AWG wire and cleanly shears 6-32 and...

Insulated Wire Stripper/Cutter is individually tested to meet or exceed ASTM F1505-16(2021) and IEC 60900:2018 standards for insulated toolsThick multi-layer grip design provides protection against...

Cuts, strips and loops 20-30 AWG Solid and 22-32 AWG Stranded wire and cleanly shears 6-32 and 8-32 screwsPrecision ground stripping holesStrong-gripping serrated nose for easy bending, shaping, and...

Individually tested to meet or exceed ASTM F1505-10, IEC 60900: 2004, CAN/ULC-60900-09, NFPA 70E, 2012 ed., CSA Z462 for insulated toolTwo layers of insulation provide protection against electric...

Electrician's Step Bit Kit with 3 step bits sized 7/8, 1-1/8, and 1-3/8-Inch for creating hole cutouts in panels and j-boxes to accommodate most commonly used 1/2, 3/4, and 1-Inch conduitTwo spiral...

Step Drill Bit has 2 spiral flutes to remove chips and help pull the bit through material for faster cuttingTitanium nitride coating dissipates heat for longer bit life1/4-Inch hex shank for firm,...

Step Drill Bit has 2 spiral flutes to remove chips and help pull the bit through material for faster cuttingTitanium nitride coating dissipates heat for longer bit life1/4-Inch hex shank for firm,...

Cable cutting notch in scissor blade provides increased leverage and stability on tough cuts of up to 14 AWG wireElectrician Scissors strip 19 and 23 AWG wire and have notch in tip for deburring...

Heavy duty, durable carbide hole cutters for long lifeCuts quick, precise holes in stainless steel, mild steel, iron, copper, and brass sheet up to 3/16-Inch (0.5 cm) thickSplit point pilot drill...

Heavy duty, durable carbide hole cutters for long lifeCuts quick, precise holes in stainless steel, mild steel, iron, copper and brass sheet up to 3/16-Inch (0.5 cm) thickSplit point pilot drill bit...

Cuts precise holes in drywall and ceiling tileRecommended for most major brands of 6-Inch (152 mm) recessed lighting fixturesFor use in drywall, ceiling tile, steel, wood, plastic and stainless...

Replacement tapFor aluminum, brass, copper, mild steel and plasticFor use on up to 10 gauge metalHigh speed steel

Multi-bit stubby screwdriver includes 7 different screwdriver bits and a 1/4-Inch nut driverCompact driver reaches easily into tight spotsIndustrial-strength bits that are conveniently housed in the...

Multi-bit screwdriver / tap tool increases job speed by combining taps and drivers in one toolSix common tap sizes (6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20)Four Screwdriver tips (#1 and #2 Phillips,...

Slim-Tip Insulated Screwdriver Set includes: 4-Inch round shank in a #2 Phillips and 1/4-Inch Cabinet tips; 6-Inch round shank in a #2 Square and 3/16-Inch Cabinet tips1000-Volt rated insulated...