Pullers

The 3-piece, handy puller with force-amplifying, self-centering, and tensioning jaws in the set is used for 2-jaw extraction of bearings, gears, and discs in tight and hard-to-reach spaces. This allows for the loosening of any component that sits on a...

The 10-piece, ready-to-use screw extractor set from the K-49 series with fine ribbed shape is used for extracting broken bolts and screws with right-hand thread. Ideal for screws with a thread diameter of 4 to 20 mm. The set contains six screw...

The 8-piece mechanical nut splitter set K-54-B is used to split stubbornly seized, rusted, or over-tightened nuts of quality classes 5, 6, and 8. During this splitting process, the threaded pin remains undamaged. The two sharp blades of the splitter...

The 4-piece mechanical nut splitter set K-55-B is used for splitting seized, rusted, or over-tightened nuts of quality class 6. During this splitting process, the threaded pin remains undamaged. The two sharp edges of the splitter chisel, honed with a...

The thread repair set is used for restoring high-load screw connections in torn internal threads, as well as for repairing defective and stripped threads in all oil pans and drain plugs. Worn and damaged threads can be properly and cost-effectively...

The 15-piece Chain Tensioner Set of Series 59 is used for separating, tensioning, and riveting chains. With this set, chains can not only be safely separated but also accurately riveted back together thanks to a pressing aid. This set prevents injuries...

The reversible pressure piece set is considered the optimal addition for KUKKO pressure spindles with interchangeable tips and can be used for any mounting position. For individual adjustment to the shaft, the pressure piece is inserted into the spindle...

The reversible pressure piece set is considered the optimal addition for KUKKO pressure spindles with interchangeable tips and can be used for any mounting position. For individual adjustment to the shaft, the pressure piece is inserted into the spindle...

The reversible pressure piece set is considered the optimal addition for KUKKO pressure spindles with interchangeable tips and can be used for any mounting position. For individual adjustment to the shaft, the pressure piece is inserted into the spindle...

The reversible pressure piece set is considered the optimal addition for KUKKO pressure spindles with interchangeable tips and can be used for any mounting position. For individual adjustment to the shaft, the pressure piece is inserted into the spindle...

The multi-side bolt puller set K-68-A is used for pulling components with threaded holes. The multi-crossbar allows for the attachment of up to three foot bolts for even more uniform force distribution. For precise adjustment assistance, a scale with...

The multi-way puller set K-68-B is used for removing components with threaded holes. A power nut integrated into the crossbar allows for the application of force that would otherwise only be achievable with hydraulic systems. The multi-crossbar enables...

The Multi-Sided Bolt Puller Set K-68-C is used to pull components with threaded holes. A power nut integrated into the crossbar allows for applied force that would otherwise only be achievable with hydraulic systems. The multi-crossbar allows for the...

The 18-piece ball bearing puller set “PULLPO” K-70-A is used for completely non-destructive pulling of deep groove ball bearings without removing the shaft in trades, industry, and workshops. Even without the possibility of support, the PULLPO can...

The 21-piece ball bearing puller set “PULLPO” K-70-B is used for completely non-destructive removal of deep groove ball bearings without disassembly of the shaft in crafts, industry, and workshop. Even without the possibility of support, the PULLPO can...

The 38-piece ball bearing puller set “PULLPO” K-70-C is used for completely non-destructive removal of deep groove ball bearings without disassembly of the shaft in crafts, industry, and workshops. Even without the possibility of support, the PULLPO can...

The 22-piece ball bearing installation kit K-71-L-A is used for the fast, precise, and secure installation of bearings and seals in craft, industry, and workshop. The set includes 18 impact rings made of impact-resistant polyethylene terephthalate, 2...

The 20-piece K-71-L-B ball bearing installation set is used for the quick, precise, and safe installation of bearings and seals in crafts, industry, and workshops. The set includes 16 impact rings made of impact-resistant polyethylene terephthalate, 2...

The 38-piece ball bearing installation set K-71-L-C is used for the quick, precise, and safe installation of bearings and seals in crafts, industry, and workshops. The set includes 33 impact rings made of impact-resistant polyethylene terephthalate, 3...

The hydraulic spindle with hand lever operation in the case is suitable for pulling off particularly stubborn bearings, gears, and discs with a pulling force of up to 21 t. Thanks to the integrated grease hydraulic, no external pump is required. The...