Pullers

The 115-piece type holder set of series 333-ST is used for multi-digit engraving in the industry. The set has a hardness at the engraving between 58 and 60 HRC. The highly flexible engraving system with free combination of the various type stamps is...

The 2-jaw puller is used for pulling steering wheels with large pull slots and hard-to-reach components. The variant 34-0 is equipped with a pair of short jaws. The model 34-1 has an additional pair of long jaws. Due to their construction, the jaws are...

The 2-jaw puller is used for pulling steering wheels with large pull slots and hard-to-reach components. The variant 34-0 is equipped with a pair of short jaws. The model 34-1 has an additional pair of long jaws. Due to their construction, the jaws are...

The pair of puller jaws with pressure piece is suitable for steering wheel pullers of series 34 and, thanks to the pressure piece, also for the steering wheel of the Opel Frontera. Through the freely movable pullers gliding on the crossbar, eccentric...

With the recoil-free soft-face hammer, various surfaces can be processed, positioned, and aligned precisely. The soft-face hammer is used for assembly, repair, and maintenance work on sensitive materials that must not be damaged. The steel ball filling...

With the recoil-free soft-face hammer, various surfaces can be processed, positioned, and aligned precisely. The soft-face hammer is used for assembly, repair, and maintenance work on sensitive materials that must not be damaged. The steel ball filling...

The C-clamps made entirely of steel from the series 365 are used for resilient elastic clamping of multiple workpieces in crafts, industry, and workshops. The clamp generates particularly high press force through its trapezoidal spindle. The series 365...

The C-clamps made entirely of steel from the series 365 are used for resilient elastic clamping of multiple workpieces in crafts, industry, and workshops. The clamp generates particularly high press force through its trapezoidal spindle. The series 365...

The C-clamps made entirely of steel from the series 365 are used for resilient elastic clamping of multiple workpieces in crafts, industry, and workshops. The clamp generates particularly high press force through its trapezoidal spindle. The series 365...

The C-clamps made entirely of steel from the series 365 are used for resilient elastic clamping of multiple workpieces in crafts, industry, and workshops. The clamp generates particularly high press force through its trapezoidal spindle. The series 365...

The C-clamps made entirely of steel from the series 365 are used for resilient elastic clamping of multiple workpieces in crafts, industry, and workshops. The clamp generates particularly high press force through its trapezoidal spindle. The series 365...

The C-clamps made entirely of steel from the series 365 are used for resilient elastic clamping of multiple workpieces in crafts, industry, and workshops. The clamp generates particularly high press force through its trapezoidal spindle. The series 365...

The hub puller with crossbar is used for pulling hub assemblies on trucks. Up to five puller jaws can be hung on the crossbar, which are freely movable on it. This makes the puller universally applicable for various vehicle models. The freely movable...

The pull hook for the hub puller of series 38 is hung on the crossbar. The pull hooks are used for pulling wheel hubs on trucks. Through the movable jaws gliding on the crossbar, eccentric components can also be removed.

The plate is a spare part for the universal hub pullers of series 38.

The single, robust, height-adjustable puller jaw guarantees particularly safe removal of bearings, gears, and discs. The hook length can be individually adjusted in the range of 400-700 mm. Through the freely movable, sliding jaws on the crossbar, even...

The pair of two height-adjustable puller jaws is suitable for 2-jaw pullers. The robust puller jaws guarantee a particularly safe removal of bearings, gears, and discs. Through the freely movable jaws gliding on the crossbar, even eccentric components...

The set of three height-adjustable puller jaws is suitable for 3-jaw pullers. The robust puller jaws guarantee a particularly safe removal of bearings, gears, and disks. Through the freely movable, gliding {Traverse} puller jaws, even eccentric...

The hub puller with the crossbar is used for pulling hubs from trucks. The spindle runs in a threaded bushing that is axially movable, in case impacts on the spindle head are necessary to loosen the hub. The freely movable T-handle on the spindle head...

The pair of puller jaws is suitable for universal hub pullers of series 40. Through the freely movable, sliding puller jaws on the crossbar, eccentric components can also be removed.