●The caliber uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . ●The rising angle is 45° x 6°. It suppresses offset height and length, making it...

●For tightening flare nuts used in hydraulic piping in automobiles, general industrial machinery, etc. [ When using with the 9×12 preset torque wrench head exchangeable set ] ● Be sure to use the set with the included extension exchange head (...

●An L-shaped hexagon wrench with a round shaft that prevents the wrench from bending during use.

●The width of the head is as small as possible, and the area where force is applied is made more voluminous.This is KTC's unique new spear-shaped head, which is an evolution of the conventional spear-shaped head. ●The handle has a recess in the center...

Metal Case

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . (Excluding 5mm or less) ●The width of the open end head is as...

Replacement Snap Ring Plier Tip Claw Set, Set of 10

●A high-grade hexagonal bar wrench with excellent wear resistance and torsional strength made of carefully selected special alloy steel and appropriate heat treatment. ●It can rotate diagonally up to approximately 25 degrees, making it easy to tighten...

●The caliber has a power -fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work.

Metal Case

●A through-type driver with a hexagonal bolster. ●Comes with a magnet at the tip. Comes with a magnet so you can securely catch screws. The grip has a large rectangular shape that makes it easy to apply force, and there is a recess for placing your...

Metal Case

●The caliber uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . ●The rising angle is 45° x 6°. It suppresses offset height and length, making it...

●One wrench can be used for 6 sizes (4.5, 5.1, 5.8, 6.1, 6.4, 6.6) and can be applied to most vehicles.

3/8in Sq. Hex. Bit Socket, 9mm

●This driver has a thicker and longer shaft for increased strength, and the shaft and handle are firmly fixed.

●Round-shaped grip suitable for pushing and turning so your palm won't hurt. ●The grip is lightweight, does not feel sticky, and is made of environmentally friendly material (elastomer). ●The orange color on the grip represents + (plus). ●The shaft is...

● Uses AMBAC system (PAT.), a mechanism to prevent pins from falling out. ●Replacement pins and rings are available.

Wooden Grip Screwdriver, Cross Tip, Phillips #3 ●Uses natural wood that is easy on the hands. ●The shaft is a through type with a magnet at the tip.

●The caliber uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . ●The rising angle is 45° x 6°. It suppresses offset height and length, making it...