High quality bits for recessed TORX PLUS® screws. TORX PLUS® profile: in comparison to normal TORX® profiles, the enlargement of the 6 torque-transferring flanks between the tool and the screw is effected by means of an ellipse-shaped profile design and...

●Thin design with a total length of 30 mm and a grip part thickness of 15 mm, making it suitable for use in narrow spaces. ●A large force can be applied with the φ40 grip.

●This is a special wrench for attaching and detaching brake pipe flare nuts and clutch pipe flare nuts (hydraulic type only). ●The diameter part has a shape where 5 points touch each other, so you can turn the nut securely.

Gift Driver Set, Set of 2 Stubby Screwdrivers Phillips #2 and Slotted 6mm

●Since the hexagonal points are symmetrically angled at 15°, it can perform the same work as a dodecagonal box wrench (rotating at a 30° swing angle). ●The chamfer on the hexagonal diameter section has been eliminated to increase the contact area...

●Since the hexagonal points are symmetrically angled at 15°, it can perform the same work as a dodecagonal box wrench (rotating at a 30° swing angle). ●The chamfer on the hexagonal diameter section has been eliminated to increase the contact area...

●Since the hexagonal points are symmetrically angled at 15°, it can perform the same work as a dodecagonal box wrench (rotating at a 30° swing angle). ●The chamfer on the hexagonal diameter section has been eliminated to increase the contact area...

●Since the hexagonal points are symmetrically angled at 15°, it can perform the same work as a dodecagonal box wrench (rotating at a 30° swing angle). ●The chamfer on the hexagonal diameter section has been eliminated to increase the contact area...

●The caliber uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . ●The rising angle is 45° x 6°. It suppresses offset height and length, making it...

Pinch Off Pliers

Parts Tray (YKPT-20) Dedicated Divider YKPT-20S

●The ratchet part can be fully tightened. ● Feed angle of 5° (excluding 8mm) allows smooth continuous work in narrow spaces. ●Rotation direction can be changed by lever operation. ●Uses a non-slip grip design.

●The caliber has a power -fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work.

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . (Excluding 5mm or less) ●The width of the open end head is as...

Wooden Grip Screwdriver (Flat), 8mm, Through Type

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . (Excluding 5mm or less) ●The width of the open end head is as...

●Super long straight type that makes it easy to apply large torque. It is also easy to work in narrow and deep places. ●The glasses part has an offset shape on one side, so it can be used on bolts and nuts that have a flat surface or a counterbore around...

Wooden Grip Screwdriver, Flat Tip ●Uses natural wood that is easy on the hands. ●The shaft is a through type with a magnet at the tip.

It can also be used as an extension bar since the grip end has an insertion angle.

●For tightening and loosening flare nuts used in hydraulic piping in automobiles, general industrial machinery, etc. ●The caliber is double hexagonal, making it easy to approach the nut. ●Since the distance from the diameter part to the drive center...