For bending wire loops in electrical work and jewelry makingSmooth ground, round short jawsSmooth tipsGood for holding components and/or wire when solderingSpecial tool steel , forged and oil-hardened

KN-0821-185SBA and KN-0821-185 are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

KN-1098-I220 and KN-1098-I220-SBA are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will...

KN-9901-220 and KN-9901-220-SBA are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

Great for removing nailsFlat striking (hammer) face for driving in nailsCutting edge hardness (approx. 60 HRC)Special tool steel; forged, multi stage oil-hardened

KN-7101-200RSBA and KN-7101-200R are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will...

Includes 12 40 200 (Self-Adjusting Wire Stripper 8-32 AWG) and 97 53 04 (Self-Adjusting Crimping Pliers For Wire Ferrules)Assortment contains some of the most common sizes of end sleeves0.5, 0.75, 1.0, 1.5 and 2.5mm² end sleeves - 200 each4 and 6 mm²...

#N/A

Crimping pliers for solder-free electrical connectionsFor crimping non-insulated open plug type connectorsCapacity - 2.8 mm - 0.1 to 0.25, 2.8 mm - 0.5 to 1.0, 4.8 mm - 0.5 to 1.0 and 4.8 mm - 1.5 to 2.5 and 26 to 14 AWGThe lever transmission reduces...

Ideal for frequent changeovers to workpieces of different sizesAutomatic adjustment for one-hand operation both for right-handed and left-handed useGood access to the workpiece due to the slim dimensions in the head and joint area and flush joint...

●This is a special wrench for attaching and detaching brake pipe flare nuts and clutch pipe flare nuts (hydraulic type only). ●The diameter part has a shape where 5 points touch each other, so you can turn the nut securely.

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . (Excluding 5mm or less) ●The width of the open end head is as...

●The width of the head is as small as possible, and the area where force is applied is made more voluminous.This is KTC's unique new spear-shaped head, which is an evolution of the conventional spear-shaped head. ●The handle has a recess in the center...

●Intermediate size between standard and short, designed for workability in narrow spaces. ●The ratchet part can be fully tightened. ● Feed angle of 5° (excluding 8mm) allows smooth continuous work in narrow spaces. ●The arrow display allows you to see...

●Compact size with a total length of 35mm, it can be used for car models that cannot be used with conventional long types. ●Indispensable for puncture repair and tire/tube replacement.

●The ratchet part can be fully tightened. ●Feed angle of 5° (excluding 9mm or less and 21mm or more) allows smooth continuous work in narrow spaces. ●The arrow display allows you to see the working direction at a glance. ●Uses a non-slip grip design.

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . (Excluding 5mm or less) ●The width of the open end head is as...

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . (Excluding 5mm or less) ●The width of the open end head is as...

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . (Excluding 5mm or less) ●The width of the open end head is as...

Plastic Grip Screwdriver (Cross), Phillips #2