Description
- This is a specialized tool for removing lock pin pull-out type resin clips used in car fender liners, bumpers, etc.
- The spear-shaped tip is compatible with three-groove and four-groove lock pin pull-out types.
- When the tip is inserted so as to slide into the lock pin, KTC's unique spear-shaped tip and the angle of the intermediate shaft push up the lock pin, and the pin comes out naturally.
- There is no need to lift the grip after inserting, and the lock pin can be pulled out in one action by simply pushing.
- The revised tip size securely grips the lock pin and reduces the risk of damage.
- The stubby type allows for work in narrow spaces.
- It can also be used to remove trim clips and brush clips used in interior parts such as door trims, roofs, and floors.
- This is a set of AP209-7A with a tip groove width of 7mm and AP209-9A with a tip groove width of 9mm.
Introducing our 'Engine Oil Maintenance Solution'
Detailed information
Clip Clamp Tool Angle Stubby Small AP209-7A
Clip Clamp Tool Angle Stubby Medium AP209-9A
Application of lock pin pull-out type clipsBy using groove widths of 7mm and 9mm, the risk of clip breakage is reduced. |
|
This stubby-type tool has a compact overall length, and the angle of the intermediate shaft is also shallow, making it easy to work in narrow, recessed, or other hard-to-reach work areas. The lock pin can be removed with a single push. There's no need to raise the grip, and its compact stubby design allows it to reach even the tightest spaces where conventional clip clamp pliers were difficult to use. This significantly improves work efficiency. |
Apply clip |
__#What's Included
| No. | B | D | S | L1 | L2 | L3 | W | H | ▼g |
|---|---|---|---|---|---|---|---|---|---|
| AP209-7A | 13.5 | 6 | 7 | 120 | 43 | 60 | 36 | 70 | 60 |
| AP209-9A | 18 | 8 | 9 | one two three | 41.5 | 60 | 36 | 72 | 70 |
| No. | Tip groove width | Three grooves | Four grooves |
|---|---|---|---|
| AP209-7A | 7 | ○ | ◎ |
| AP209-9A | 9 | ◎ | △ |
