Knipex

For cutting cables, stripping wire and crimping insulated terminals, cable connectors and plug-type connectorsWith threaded holes for cutting copper and brass screws threaded 7/64", 1/8", 9/64",...

Crimping pliers with changer magazine - contains (3) of the most common crimping diesCrimping Pliers with round magazine and three interchangeable crimping dies for: - non-insulated open plug-type...

Crimping pliers with changer magazine - contains (5) of the most common crimping diesCrimping Pliers with round magazine and five interchangeable dies for; - non-insulated open plug-type connectors...

Tool for putting on boards, sockets and fieldsPushing down and cutting in one operationFor UTP and STP cables, conductor 0.4 - 0.8 mm diameterIntegrated pulling hook and release bladeHousing is made...

Crimp system pliers for non-insulated open plug-type connectors (3/16" and 1/4" connector width)Just one tool for almost 1,000 crimping applicationsParallel crimping die movementRepetitive, high...

Knipex 97 43 06 Crimp System Pliers

Crimp system pliers - crimping dies sold separatelyJust one tool for almost 1,000 crimping applicationsParallel crimping die movementRepetitive, high crimping quality due to precision dies and...

Crimp system pliers in a plastic case with foam insert - crimping dies sold separatelyJust one tool for almost 1,000 crimping applicationsParallel crimping die movementRepetitive, high crimping...

Crimping die for Non-insulated spade plug connectorsCapacity - 0.1 to 2.5 mm² and 26 to 14 AWG

Crimping die for Non-insulated spade plug connectorsCapacity - 0.5 to 6.0 mm² and 20 to 10 AWG

Crimping die for insulated terminals and plug connectorsCapacity - 0.5 to 6.0 mm² and 20 to 10 AWG

Crimping die for end sleeves - ferrulesCapacity - 0.25 to 6.0 mm² and 24 to 10 AWG

Crimping die for end sleeves - ferrulesCapacity - 10 to 16 and 25 mm² and 8, 6 and 4 AWG

Crimping die for spade connectors and non insulated open plug type connectors (plug width 6.3mm)Capacity - 1.25 to 2.5, 3.0 to 6.0 mm² and 14 to 10 AWG

Knipex 97 49 16 Crimping Die For Insulated Terminals and Cable Connectors

Crimping die for twin end sleeves (ferrules) for two flexible conductorsCapacity - 2x6 / 2x10 / 2x16

Crimping die for end sleeves - ferrulesCapacity 35, 50 mm² and 2 and 0 AWG

Crimping die for F-connectors for TV and satellite connectionsCapacity - SW 9/32", 21/64", 5/16" (7.0, 8.4 and 8.1 mm) and sleeve capacity - 19/64" and 3/8" (7.7 and 9.5 mm)

Crimping die for non-insulated terminals and plug connectorsCapacity - 16 and 25 mm² and 6 and 4 AWG

Crimping die for D Sub, HD20 and HDE plugCapacity - 0.03 to 0.56 mm² and 32 to 20 AWG