KTC

Replacement For Curved Long Snap Ring Pliers Shaft

●The switching lever allows ratchet operation in both left and right directions. ●You can turn the gear quickly by turning it with your fingertips. ● Bits with a width across the shaft of 6.3 mm (...

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work ...

●Compact size with a total length of 35mm, it can be used for car models that cannot be used with conventional long types. ●Indispensable for puncture repair and tire/tube replacement.

SOP-171 Snap Ring Pliers

Inner Bolt For MCCU14

Chest SKX0213BK

J Type Channel Brush, 235mm Length

YKPTSM Parts Tray With Magnet, 9.4 x 5.5 x 1.7 Inches (240 x 140 x 42 mm)

●A thin-mouth spanner suitable for tightening and loosening double nuts and working in areas with narrow gaps. ●The caliber is straight on one side and has a 15 degree angle on the other side.

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work ...

Stainless Scraper Set (2Pcs.)

YKPTRM Parts Tray With Magnet, 5.9 x 1.6 Inches (150 x 41 mm)

●The caliber uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . ●The rising angle is 45° x...

Parts Tray With Magnet, 360 x 158 x 43mm

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work ...

●The caliber on the boxed end uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work ...

●The caliber uses a power fit shape that prevents stress concentration from damaging the edges of bolts and nuts, allowing for more reliable tightening and loosening work . ●The rising angle is 45°...

●For tightening flare nuts used in hydraulic piping in automobiles, general industrial machinery, etc. [ When using with the 9×12 preset torque wrench head exchangeable set ] ● Be sure to use the...

●An L-shaped hexagon wrench with a round shaft that prevents the wrench from bending during use.