Kukko

The TX hand clamp holders of series 212 are used for actuating hard-to-reach screw heads in workshops, industry, and craftsmanship. Unlike hex keys, the Torx profile engages in the middle, making it...

The TX screwdrivers with T-handle from series 212 are used for operating screw heads in workshops, industry, and craftsmanship. Unlike hex keys, the Torx profile engages centrally, allowing for...

The TX angle screwdrivers in the series 211 are used for operating hard-to-reach screw heads in workshop, industry, and trades. Unlike hexagon keys, the Torx profile engages in the center, making it...

The TX angle screwdrivers in the series 211 are used for operating hard-to-reach screw heads in workshop, industry, and trades. Unlike hexagon keys, the Torx profile engages in the center, making it...

The TX angle screwdrivers in the series 211 are used for operating hard-to-reach screw heads in workshop, industry, and trades. Unlike hexagon keys, the Torx profile engages in the center, making it...

The clamps are replacement parts for 2-jaw universal pullers with side clamps of series 204 and 2-jaw separator pullers "Cobra" with adjustable reach depth of series 210. The clamp increases the...

The pair of jaws is suitable for 2-jaw bearing separators "Cobra" from series 210. The jaws are reversible and can be used on both sides. Through the freely movable, sliding jaws on the crossbar,...

The 2-jaw bearing separator “Cobra” with adjustable reach and side clamp is used for pulling off flat-mounted bearings, gear wheels, and discs in all common sizes for crafts, workshops, and industry...

The pair of jaws is suitable for 2-jaw bearing separators "Cobra" from series 210. The jaws are reversible and can be used on both sides. Through the freely movable, sliding jaws on the crossbar,...

The 2-jaw bearing separator “Cobra” with adjustable reach and side clamp is used for pulling off flat-mounted bearings, gear wheels, and discs in all common sizes for crafts, workshops, and industry...

The pair of puller jaws is suitable for 2-jaw \"Cobra\" bearing separators of series 210. The puller jaws are reversible and can be used on both sides. Through the freely movable, sliding jaws on the...

The 2-jaw bearing separator “Cobra” with adjustable reach and side clamp is used for pulling off flat-mounted bearings, gear wheels, and discs in all common sizes for crafts, workshops, and industry...

The extensions for the internal extractors of series 21 are used for loosening and pulling out deeply seated bearings, bearing outer rings, and bushes in crafts, workshops, and industry. The...

The extensions for the internal extractors of series 21 are used for loosening and pulling out deeply seated bearings, bearing outer rings, and bushes in crafts, workshops, and industry. The...

The extensions for the internal extractors of series 21 are used for loosening and pulling out deeply seated bearings, bearing outer rings, and bushes in crafts, workshops, and industry. The...

The set of extensions for internal extractors of series 21 is used for loosening and extracting deeply seated bearings, bearing outer rings, and bushings in craft, workshop, and industry. The...

The spreading spindles are spare parts for the large internal extractors 21-89 and 21-90. The spindle is used to spread the extractor jaws during internal extraction.

The spreader body sets are spare parts for the internal extractors 16-21, 21-89, and 21-90. Depending on the respective internal extractors, the sets either contain two or three spreader bodies to...

The internal extractors of the series 21 are used for pulling out internal bearings, bearing outer rings, and bushings in craftsmanship, workshops, and industry. The multi-shelled design of the...

The internal extractors of the series 21 are used for pulling out internal bearings, bearing outer rings, and bushings in craftsmanship, workshops, and industry. The multi-shelled design of the...