Kukko

The set screws are replacement parts for lever-type ball joint pullers of the series 129. They are needed for adjusting the pullers.

The replacement bodies are spare parts for various ball joint pullers of the series 129. A damaged base body can be replaced in this way.

The replacement bodies are spare parts for various ball joint pullers of the series 129. A damaged base body can be replaced in this way.

The truck ball joint press "Universal" of series 129 is used for pressing out particularly firmly seated ball pins when removing ball joints on push and steering rods for trucks, buses, and...

The ball joint puller with hydraulic spindle for heavy trucks of series 129 is used for the hydraulic extraction of the ball pins when removing ball joints on tie rods and steering rods specifically...

The 2-jaw and steering arm puller with hydraulic lift cylinder from series 129 is used for the hydraulic extraction of ball pins when removing ball joints on steering and tie rods specifically for...

The 2-jaw and steering arm puller with hydraulic lift cylinder from series 129 is used for the hydraulic extraction of ball pins when removing ball joints on steering and tie rods specifically for...

The 2-jaw puller for heavy trucks of the series 129 is used for mechanically pressing out the ball studs when removing ball joints on thrust and steering rods. The series 129 impresses with its...

The 2-jaw and steering arm puller with hydraulic lift cylinder from series 129 is used for the hydraulic extraction of ball pins when removing ball joints on steering and tie rods specifically for...

The 2-jaw and steering arm puller with hydraulic lift cylinder from series 129 is used for the hydraulic extraction of ball pins when removing ball joints on steering and tie rods specifically for...

The puller set provides replacement parts for the tie rod and tie rod end pullers for heavy trucks of the series 129-5-xx and 129-5-xx-H.

The 2-jaw puller for heavy trucks of the series 129 is used for mechanically pressing out the ball studs when removing ball joints on thrust and steering rods. The series 129 impresses with its...

The ball joint puller for heavy trucks of series 129 is used for the hydraulic extraction of ball pins when removing ball joints on tie rods and steering rods specifically for medium and heavy...

The replacement bodies are spare parts for the ball joint pullers with short hydraulic spindle of series 129-H. A damaged base body can be replaced in this way.

The spherical joint extractor with a short hydraulic spindle of series 129 is used to press out particularly stubborn ball pins during the dismantling of ball joints and tie rod ends on medium...

The ball joint puller with lever translation of the series 129 is used for pressing out the ball pins when removing ball joints as well as tie rod ends on tie rods, for medium and heavy trucks,...

The replacement bodies are spare parts for the ball joint pullers with short hydraulic spindle of series 129-H. A damaged base body can be replaced in this way.

The rod end and tie rod puller with hydraulic lifting cylinder of series 129 is used for hydraulic pressing out of ball pins when removing ball joints from push and tie rods specifically for trucks...

The bolt is a replacement part for the track and push rod joint puller of series 129-36.

The puller for tie rods and push rods of the series 129 is used for the hydraulic pressing out of the ball pins when removing ball joints on push and tie rods specifically designed for trucks and...