Kukko

The 8-piece mechanical nut splitter set K-54-B is used to split stubbornly seized, rusted, or over-tightened nuts of quality classes 5, 6, and 8. During this splitting process, the threaded pin...

The spherical joint extractor with a short hydraulic spindle of series 129 is used to press out particularly stubborn ball pins during the dismantling of ball joints and tie rod ends on medium...

The 8-piece universal puller set with extensions is used for universal applications in the 2-jaw removal of gearbox gears, bearings, sprockets, and synchronizers in all common sizes for craft,...

The 2-jaw universal puller with narrow, quickly adjustable jaws is used for the safe and user-friendly removal of bearings, gears, and discs in all common sizes for craft, workshop, and industry...

The pulling devices of series 15 are used in conjunction with the pulling devices of series 18 for the removal of ball bearings, roller bearings, inner rings, and other flat components in crafts,...

The fork separators of series 135 are used for loosening ball pivot joints that are wedged in the cone seat, for loosening steering levers, for disassembling shock absorbers, and for other separation...

The 2-jaw universal puller with narrow, adjustable jaws is used for safely removing bearings, gears, and discs in all common sizes for crafts, workshops, and industry. With the equipment of 2 pairs...

The sliding hammer devices of series 22-0 are used together with internal extractors of series 21 in crafts, industry, and workshops. The use of a sliding hammer is particularly recommended when...

The bell-shaped ball joint puller of series 128 is used for pressing out the ball studs when disassembling ball joints and tie rod ends on tie rods for all vehicle types. The puller allows for...

The 2-jaw universal puller with narrow, quickly adjustable jaws is used for the safe and user-friendly removal of bearings, gears, and discs in all common sizes for craft, workshop, and industry...

The bell-shaped ball joint puller of series 128 is used for pressing out the ball studs when disassembling ball joints and tie rod ends on tie rods for all vehicle types. The puller allows for...

The piston reset device is used for controlled, damage-free, and misalignment-free resetting of the pistons on disc brakes for cars, motorcycles, and trucks with fixed caliper disc brakes. The piston...

The 3-jaw puller with self-centering jaws is used for the safe and damage-free removal of pushed-on hub caps, wheel covers, as well as dust and grease caps. The specially shaped jaws are connected...

The 3-jaw universal puller with narrow, quick-adjustable jaws is used for the safe and user-friendly extraction of bearings, gears, and disks in all common sizes for crafts, workshops, and industry...

The two-edged mechanical nut splitters are used for splitting irreversibly jammed, rusty, or over-tightened nuts with a tensile strength of up to 800 N/mm². In this splitting process, the threaded...

The supports of the series 22 are used together with the internal extractors of the series 21 in crafts, industry, and workshops. Supports are particularly well suited for large cylinder bushings and...

The pulling devices of series 15 are used in conjunction with the pulling devices of series 18 for the removal of ball bearings, roller bearings, inner rings, and other flat components in crafts,...

The pulling jaw sets of the 70-0-S series are suitable for ball bearing pullers of the 70-0 series and are used for non-destructive removal of deep groove ball bearings without disassembling the...

The 17-K 8,883-piece separator set is used for pulling ball bearings, roller bearings, inner rings, and other flat-lying parts in crafts, industry, and workshops when there is not enough space for...

The bell-shaped ball joint puller of series 128 is used for pressing out the ball studs when disassembling ball joints and tie rod ends on tie rods for all vehicle types. The puller allows for...