Description
Description
The Dowel pin puller 223-1 is used for Removing tension pins and grooved pins in crafts, industry and workshops, as well as in mold making. The three gripping edges can be adjusted in the range of 1-8 mm to suit the respective application. The micro-serration in the chuck can further increase the holding force to ensure a secure fit. Thanks to the ergonomically shaped, solid sliding piece, the applied force can be transmitted optimally and a strong shock effect can be achieved. The 2-component handle (PB Swiss) guarantees perfect grip and maximum force transmission even with wet and oily hands. A key is included for effortless clamping or opening. In addition, the key provides higher clamping force, allowing even smooth dowel pins to be pulled out.
Application
To remove dowel pins in craft, industry, and workshop.Article features
 Overall length [mm/inch] |
 Clamping diameter (min - max) [mm/inch] |
 Length of the sliding hammer [mm/inch] |
impact stroke [mm/inch] |
 Impact mass [kg] |
Gross weight [kg/lb] |
 Carbon footprint [kg CO₂e] |
FWI seal of origin "Made in Germany" |
|---|---|---|---|---|---|---|---|
|
435 mm / 17 1/8 in |
1 - 8 mm / 1/32 - 5/16 in |
395 mm / 12 13/16 in |
200 mm / 7 7/8 in |
0,50 kg |
1 kg / 2.205 |
2,14 | ✓ |
