Description
Description
The puller sets of the series 70-A-K-S are suitable for ball bearing pullers of the series 70 and are used for non-destructive extraction of deep groove ball bearings without dismounting the shaft. In addition to the jaws, the sets also include spacer rings as spare parts.
Application
For pullers of series 70 for non-destructive removal of deep groove ball bearings without removing the shaft.Article features
 Reach external extraction [mm/inch] |
 Overall length [mm/inch] |
 Total jaw thickness (L+1 mm) (jaw distance to base surface) [mm/inch] |
 Overall jaw's hooked claw depth (overall claw depth H) [mm/inch] |
 jaw's hooked claw width (jaw spread J) [mm/inch] |
 Usable jaw's hooked claw reach (usable claw reach O) [mm/inch] |
 Jaw's hooked claw thickness at the tip (claw thickness K) [mm/inch] |
Gross weight [kg/lb] |
 Carbon footprint [kg CO₂e] |
|---|---|---|---|---|---|---|---|---|
|
150 mm / 5 7/8 in |
176 mm / 6 15/16 in |
1 mm / 1/32 in |
7 mm / 1/4 in |
5,5 mm / 3/16 in |
2 mm / 1/16 in |
1 mm / 1/32 in |
0,295 kg / 0.650 |
0,39 |
