Starrett

The Starrett 264 Center Punch has a square knurled grip and will not roll when laid down. They are hardened and properly tempered. The tips are accurately centered and ground at the proper angle to...

The Starrett 264 Center Punch has a square knurled grip and will not roll when laid down. They are hardened and properly tempered. The tips are accurately centered and ground at the proper angle to...

The Starrett 264 Center Punch has a square knurled grip and will not roll when laid down. They are hardened and properly tempered. The tips are accurately centered and ground at the proper angle to...

The Starrett 263 & 263M Micrometer Head features a lock nut, carbide face, 0-25mm range, and 0.01mm graduation. 0-25mm Range, 0.01mm Grad, Lock Nut, Carbide Face.

The Starrett 264 Center Punch has a square knurled grip and will not roll when laid down. They are hardened and properly tempered. The tips are accurately centered and ground at the proper angle to...

The Starrett 260 Groove Micrometer quickly and easily measures widths of internal or external grooves and lands. .001" Graduations. Range: .051"-1.050" Groove widths, 0-1.000" Land Widths. 1-5/8"...

The Starrett 262 Micrometer Head includes 0-1" range, lock nut, ratchet stop, and .001" graduation. 0-1" Range, .001" Grad, Ratchet Stop, Lock Nut.

Starrett 26 Series Outside Calipers feature improved joint design for tension adjustment. Legs are made from a high-grade steel, rugged in construction, and well-finished. Tension will not change...

Starrett 26 Series Outside Calipers feature improved joint design for tension adjustment. Legs are made from a high-grade steel, rugged in construction, and well-finished. Tension will not change...

This contact has a small, hardened roller 3/8" (9.5mm) in diameter for continuous gaging of moving material where the material movement is at a slow speed. Contact has #4-48 screw thread and...

For mounting AGD indicators with 8 mm stems in gaging and work location fixtures, these collets simplify fixture mounting. Screw the collet into the fixture or into our 648 Depth Gage Base, insert...

For mounting AGD indicators with 3/8" (9.5 mm) stems in gaging and work location fixtures, these collets simplify fixture mounting. Screw the collet into the fixture or into our 648 Depth Gage Base,...

Split bushings fit over the indicator stem to increase the overall diameter for mounting infixtures. Split Bushing, 1/2" Length, .375" ID, .500" OD.

The Starrett Contact Point Set includes: 14 points with #4-48 screw thread to fit AGD indicators; a regular 1/4" (6.3mm) long point; 9 special form points; a 28 shock absorbing anvil; and 3 extra...

Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for...

Starrett Surface Gages are designed for a wide variety of uses. This is a basic tool for machinists and toolmakers. The main uses are for accurately scribing lines, transferring measurements and for...

The Starrett 256.1M Disc-Type Micrometer is used to measure the thickness of work sections such as ribs, lands, fins, cutting edges on form tools, and chordal thickness of gear teeth. Because of...

The Starrett 254 Master Vernier Height Gage is an accurate, rugged and reliable tool that gives precise and dependable measurements over long ranges. It has an easy-to-read vernier, is stronger, and...

The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards. 0-24"...

The Starrett 252 Height Transfer Gage is ideal for use with test indicators or electronic amplifiers to accurately transfer height settings from gage blocks, height gages and other standards. 0-14"...