Starrett

Plastic Pouch for 1025-6

Plastic Pouch for 1025-5

These handy tools permit quick, accurate outside and inside measurements. Their compact size fits easily in shop coat pockets. Calipers are made of fine quality stainless steel 6", 0-4 3/4" Outside,...

POCKET SLIDE CALIPER, 5"

1015BZZ Portable Dial Thickness Gage Case Only for 1015B

After inserting work between the measuring contacts, releasing the lever will cause the spindle to contact the work, giving an accurate size reading because measuring pressure is independent of the...

1015AZZ Portable Dial Thickness Gage Case Only for 1015A

Handy pocket gage is approximately the size of a thin pocket watch. Ideal for inspectors, purchasing agents and salespeople to check the size of materials up to 3/8" or 9mm thick. The gage fits...

Tungsten carbide tipped with positive rake teeth for high alloy and stainless steels, nonferrous metals and reinforced fabrics. Complete assembly with arbor and pilot drills. Recommended for use on...

Tungsten carbide tipped with positive rake teeth for high alloy and stainless steels, nonferrous metals and reinforced fabrics. Complete assembly with arbor and pilot drills. Recommended for use on...

Contact Adapter, 2.5m to 4-48 Thread.

The MS-2 Aluminum Meterstick is parallel, accurate , and flexible rule made of anodized aluminum.

300mm (12") hole saw arbor extension bar. Suitable for use with any arbor with an 11mm (7/16") shank size.

Hole enlargement arbor. Replaces the pilot drill in any A1, A2 or A10 type arbors.

300mm (12") hole saw arbor extension bar. Suitable for use with any arbor with a 9.5mm (3/8") shank size.

Carpenter Try Square has a 8" stainless steel blade and features graduations etched on each side of the blade. With a 2" cast aluminum handle.

Carpenter Try Square has a 14" stainless steel blade featuring graduations etched on both sides of the blade with a 2" cast aluminum handle.

The FS-24 professional one-piece tempered steel framing square features permanently stamped 1/8" graduations on both sides.

Hardened, heat resistant HSS, with alloy backing and a straight 5.5-pitch smoothly cuts thin cross sections of sheet metal, corrugated or perforated steel, and applications with interrupted cuts...

Hardened, heat resistant, positive rake HSS teeth with alloy backing. Strong and shatter resistant. Economically cuts wood, metal and steel. For hand held or fixed drills. 51mm (2") cutting depth...