Cutters, Crimpers & Strippers

KN-7101-200RSBA and KN-7101-200R are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will...

KN-7101-250SBA and KN-7101-250 are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

KN-7422-200 and KN-7422-200-SBA are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

For fine cutting work in electronics and fine mechanicsSturdy, zero-backlash box jointLow friction double spring for gentle and even openingThe mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by...

Precision pliers for ultra fine cutting work in electronics and fine mechanicsGround, very sharp cutting edges without bevel for flush cutting perfect for cable tiesPrecision shaped tips cut wires resting on a board from 1/64" (0.2 mm) diameterJoint...

One tool that cuts and chamfers all common European drain pipe with diameters of 32, 40 and 50 mmReversible high-quality ball-bearing steel blade, can be easily replaced without toolsProvides a clean cut without the need to readjust or deburr the cut...

For cutting thin-walled plastic pipes and flexible hoses up to 1" outside diameter Features an opening spring and locking lever Replaceable blade part number 90 29 01 Not suitable for cutting cables Recess in base aligns the hose at a perfect right...

Spare blade for 94 15 215 and 94 35 215

For cutting cardboard, plastics, aluminum, brass and copper foilsNot suitable for steel wire or iron sheetsPrecision ground, hardened bladesPinch guard prevents operators´ fingers being pinchedAdjustable bolted jointWith opening spring and locking...

Spare cutter head for 95 32 038Not suitable for steel wire and wire ropesPrecision ground, hardened blades

For cutting cables, stripping wire and crimping insulated terminals and cable connectorsWith threaded holes for cutting copper and brass screws threaded 7/64", 1/8", 9/64", 5/32" and 13/64" (M2.6, M3, M3.5, M4 and M5)Bolted joint for higher stability and...

Crimping die for spade connectors and non insulated open plug type connectors (plug width 6.3mm)Capacity - 1.25 to 2.5, 3.0 to 6.0 mm² and 14 to 10 AWG

Crimping die for end sleeves - ferrulesCapacity 35, 50 mm² and 2 and 0 AWG

Crimping die for modular plugsCapacity - 0.5 to 2.5 mm² and 20 to 14 AWG

Four mandrel crimping pliers for turned contactsFor crimping turned contactsCapacity - 0.14 to 6 mm² and 26 to 10 AWGFour-mandrel crimping for top-quality crimping connectionsMandrel gauge to check the basic settingRepetitive, high crimping quality due...

KNIPEX Twistor® T combines the features of a front and side crimper into 1 toolCrimp head can be freely rotated 360°, with 8 locking positionsEnd sleeves (ferrules) can be crimped from almost any working positionCreates a trapeziodal crimp profile, high...

Includes 12 40 200 (Self-Adjusting Wire Stripper 8-32 AWG) and 97 53 04 (Self-Adjusting Crimping Pliers For Wire Ferrules)Assortment contains some of the most common sizes of end sleeves0.5, 0.75, 1.0, 1.5 and 2.5mm² end sleeves - 200 each4 and 6 mm²...

KN-9901-220 and KN-9901-220-SBA are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

D-SUBMINIATURE CONTACT CRIMP TOOL 30-20 AWG

NON-INSULATED TERMINAL CRIMP TOOL 22-10 AWG