Cutters, Crimpers & Strippers

KN-7402-250 and KN-7402-250-SBA are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

20% less effort required compared to conventional diagonal cutters of the same lengthForged-on axle for heavy-duty workFor very tough, continuous use1000V multi-component grips, ASTM F1505-testedHigh cutting performance with minimum effort due to...

High Leverage Diagonal Cutters-Spring, 6 1/4", Multi-Component

KN-7491-250SBA and KN-7491-250 are identical toolsSBA: The "SBA" added to the part number signifies that the tool comes in retail packaging, typically a carded blister pack. No SBA Only: This item will not contain elaborate retail packaging and will be...

Knipex 75 02 125 Electronics Diagonal Cutters

Electronics Diagonal Cutters, 4 1/2", Multi-component, Polished, Semi-flush with Small Bevel Cut, Tapered Head, Up to 1/64" Hard Wire

For fine cutting work in electronics and fine mechanicsSturdy, zero-backlash box jointLow friction double spring for gentle and even openingThe mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by...

Electronics Super Knips®-ESD Handles, 5", Multi-Component, Polished, Flush Cut, Oval Head, Up to 3/64" Medium Wire

Electronics Super Knips®, 5", Multi-Component, Polished, Flush Cut, Oval Head, Up to 3/64" Medium Wire, Lead Catcher

Electronics Super Knips®, 5", Multi-Component, Black-Oxide, Flush Cut, Oval Head, Up to 3/64" Medium Wire, Lead Catcher

For cutting multilayer and pneumatic hoses up to 3/4" outside diameterFeatures an opening spring and locking leverReplaceable blade part number 90 29 01Not suitable for cutting cablesWide support base automatically aligns hoses perfectly at right angles...

For cutting and shortening cable ducts and for plastic material up to 5/32" (4.0 mm) thicknessIncludes opening spring and easy to use locking device that keeps the blades secure when not in useSpecial lever transmissionBlade is made of special tool...

Designed for cutting tire cord, wire rope and cableCompact size, lightweight, high performance levelIncludes thumb lock and opening springFor cutting tire cord, wire rope and cable up to 5/64" (2.0 mm)Box joint design for greater stabilityCuts cleanly...

For cutting cables, stripping wire and crimping insulated terminals and cable connectorsWith threaded holes for cutting copper and brass screws threaded 7/64", 1/8", 9/64", 5/32" and 13/64" (M2.6, M3, M3.5, M4 and M5)Bolted joint for higher stability and...

For cutting cables, stripping wire and crimping insulated terminals, cable connectors and plug-type connectorsWith threaded holes for cutting copper and brass screws threaded 7/64", 1/8", 9/64", 5/32" and 13/64" (M2.6, M3, M3.5, M4 and M5)Bolted joint...

Crimping die for insulated terminals and plug connectorsCapacity - 0.5 to 6.0 mm² and 20 to 10 AWG

Crimping die for end sleeves - ferrulesCapacity - 0.25 to 6.0 mm² and 24 to 10 AWG

Crimping die for non-insulated terminals and plug connectorsCapacity - 16 and 25 mm² and 6 and 4 AWG

Crimping die for non-insulated butt connectorsCapacity - 1.5 to 4.0 mm² and 16 to 8 AWG

Crimping die for turned contacts (HTS and Harting)Capacity - 0.14 to 4.0 mm² and 26 to 12 AWG