Description
Description
The tie rod and drag link joint puller with mechanical spindle from the 129-7 series is used for pressing out and separating ball studs when removing Ball joints on tie rods and drag links. The puller is specifically designed for use on Trucks and low-floor buses. Thanks to the integrated adapter plate and the reducing piece, the puller can be used not only with a mechanical spindle but also with a grease hydraulic spindle from the 800 series or a lifting cylinder (YSM-200).
Application
For hydraulic pressing of the ball pins during the removal of ball joints on steering and track rods specifically for trucks and low-floor buses.Article features
 jaw opening [mm/inch] |
 Lever clamping range [mm/inch] |
Max. tensile force [kN] |
 Max. tension force [t/US t. sh.] |
Gross weight [kg/lb] |
FWI seal of origin "Made in Germany" |
|---|---|---|---|---|---|
|
36 mm / 1 7/16 in |
60 mm / 2 3/8 in |
100 kN |
10 t / 11.02 |
5,395 kg / 11.896 |
✓ |
