Kukko

Description The side bolts with nuts are spare parts for the pulling devices of series 15. The side bolts are used to position and secure the separating jaws on the workpiece. Application Spare...

The 8-piece ball bearing puller set with counter stay and sliding hammer K-22-B is used for pulling internal bearings, outer bearing rings, and bushings in crafts, workshops, and industry. The...

The pulling devices of series 15 are used in conjunction with the pulling devices of series 18 for the removal of ball bearings, roller bearings, inner rings, and other flat components in crafts,...

The piston reset device is used for controlled, damage-free, and misalignment-free resetting of the pistons on disc brakes for cars, motorcycles, and trucks with fixed caliper disc brakes. The piston...

The supports of the series 22 are used together with the internal extractors of the series 21 in crafts, industry, and workshops. Supports are particularly well suited for large cylinder bushings and...

The single-blade mechanical nut splitter is used for splitting stuck, rusted, or over-tightened nuts with a tensile strength of up to 800 N/mm². During this splitting process, the threaded pin...

The single-blade mechanical nut splitter is used for splitting stuck, rusted, or over-tightened nuts with a tensile strength of up to 800 N/mm². During this splitting process, the threaded pin...

The handy 2-jaw puller with force-amplifying and self-centering jaws is used for the sensitive removal of small bearings, gears, and discs in tight, hard-to-reach spaces. The compact and space-saving...

The set of three extremely narrow, quick-adjustable jaws is suitable for 3-jaw universal pullers. The trapezoidal contact surface of the claw ensures that even very tight and poorly accessible gaps...

The single-blade mechanical nut splitter is used for splitting stuck, rusted, or over-tightened nuts with a tensile strength of up to 800 N/mm². During this splitting process, the threaded pin...

The two-edged mechanical nut splitters are used for splitting irreversibly jammed, rusty, or over-tightened nuts with a tensile strength of up to 800 N/mm². In this splitting process, the threaded...

The accessories for “AXLE” Y-AP-75 are used together with it for the quick and problem-free pressing out and in of truck axle eye bolts in craftsmanship, industry, and workshops.

The accessories for “AXLE” Y-AP-75 are used together with it for the quick and problem-free pressing out and in of truck axle eye bolts in craftsmanship, industry, and workshops.

The micro puller is used for removing speedometer cables, pressure gauges, clocks, and similar parts. Especially in model making, the small parts puller is a helpful and reliable tool. The handy and...

The 10-piece sliding hammer set in the case KS-22-02 is used for pulling plugs and components with threads (dowel pins, key stock, bolts, etc.) in crafts, industry, and workshops. The use of a...

The portable KUKKO empty box of the K-L-BOXX series from Sortimo offers enough space for a range of tools. For ideal handling and transport, the case is equipped with 2 handles. Particularly...

The portable KUKKO empty box from the K-i-BOXX series by Sortimo offers ample space for a selection of tools. The cases are therefore the ideal mobility and storage solution for trades, workshops,...

The 38-piece ball bearing installation set K-71-L-C is used for the quick, precise, and safe installation of bearings and seals in crafts, industry, and workshops. The set includes 33 impact rings...

The multi-way puller set K-68-B is used for removing components with threaded holes. A power nut integrated into the crossbar allows for the application of force that would otherwise only be...

The 2-jaw universal puller is used for extracting bearings, gears, and discs in all common sizes for crafts, workshops, and industry. It can loosen any component that sits on a shaft and is freely...