Kukko

The 13-piece Universal Puller Set from the 2030 series is used for 2-jaw and 3-jaw pulling of bearings, gears, discs, etc. in craftsmanship, industry, and workshops. The 2030 series impresses with...

The internal extractors of the series 21 are used for pulling out internal bearings, bearing outer rings, and bushings in craftsmanship, workshops, and industry. The multi-shelled design of the...

The 8-piece mechanical nut splitter set K-54-B is used to split stubbornly seized, rusted, or over-tightened nuts of quality classes 5, 6, and 8. During this splitting process, the threaded pin...

The spherical joint extractor with a short hydraulic spindle of series 129 is used to press out particularly stubborn ball pins during the dismantling of ball joints and tie rod ends on medium...

The thread insert set for sliding hammer or counter stays of series 22 is used to pull out parts with central threaded holes in crafts, industry, and workshops. The set includes six different threads...

The 8-piece universal puller set with extensions is used for universal applications in the 2-jaw removal of gearbox gears, bearings, sprockets, and synchronizers in all common sizes for craft,...

The 2-jaw universal puller with narrow, quickly adjustable jaws is used for the safe and user-friendly removal of bearings, gears, and discs in all common sizes for craft, workshop, and industry...

The 2-jaw universal puller with narrow, quickly adjustable jaws is used for the safe and user-friendly removal of bearings, gears, and discs in all common sizes for craft, workshop, and industry...

The 2-jaw universal puller is used for extracting bearings, gears, and discs in all common sizes for crafts, workshops, and industry. It can loosen any component that sits on a shaft and is freely...

The pulling devices of series 15 are used in conjunction with the pulling devices of series 18 for the removal of ball bearings, roller bearings, inner rings, and other flat components in crafts,...

The supports of the series 22 are used together with the internal extractors of the series 21 in crafts, industry, and workshops. Supports are particularly well suited for large cylinder bushings and...

The fork separators of series 135 are used for loosening ball pivot joints that are wedged in the cone seat, for loosening steering levers, for disassembling shock absorbers, and for other separation...

The 2-jaw universal puller with narrow, adjustable jaws is used for safely removing bearings, gears, and discs in all common sizes for crafts, workshops, and industry. With the equipment of 2 pairs...

The sliding hammer devices of series 22-0 are used together with internal extractors of series 21 in crafts, industry, and workshops. The use of a sliding hammer is particularly recommended when...

The bell-shaped ball joint puller of series 128 is used for pressing out the ball studs when disassembling ball joints and tie rod ends on tie rods for all vehicle types. The puller allows for...

The 2-jaw universal puller with narrow, quickly adjustable jaws is used for the safe and user-friendly removal of bearings, gears, and discs in all common sizes for craft, workshop, and industry...

The bell-shaped ball joint puller of series 128 is used for pressing out the ball studs when disassembling ball joints and tie rod ends on tie rods for all vehicle types. The puller allows for...

The piston reset device is used for controlled, damage-free, and misalignment-free resetting of the pistons on disc brakes for cars, motorcycles, and trucks with fixed caliper disc brakes. The piston...

The 3-jaw puller with self-centering jaws is used for the safe and damage-free removal of pushed-on hub caps, wheel covers, as well as dust and grease caps. The specially shaped jaws are connected...

The 3-jaw universal puller with narrow, quick-adjustable jaws is used for the safe and user-friendly extraction of bearings, gears, and disks in all common sizes for crafts, workshops, and industry...