Kukko

The side bolts with nut are spare parts for the separator devices of series 15. The side bolts are used for positioning and securing the separator jaws to the workpiece.

The side bolts with nut are spare parts for the separator devices of series 15. The side bolts are used for positioning and securing the separator jaws to the workpiece.

The side bolts with nuts are spare parts for the separating devices of series 15. The side bolts are used for positioning and fixing the separating jaws on the workpiece.

The side bolts with nuts are spare parts for the separating devices of series 15. The side bolts are used for positioning and fixing the separating jaws on the workpiece.

The 10-piece sliding hammer set in the case KS-22-01 is used for pulling bushings as well as components with threads (dowel pins, key profiles, bolts, etc.) in crafts, industry, and workshops. The...

The 37-piece bearing installation tool set, as a lightweight external mounting model of series 71-L, is used for the quick, precise, and safe installation of bearings and seals in craft, industry,...

The mechanical pressure spindle is the heart of every KUKKO puller. It achieves a maximum pulling force of 10 t. The manual operation of the spindle allows for a sensitive control of the extraction...

The 8-piece ball bearing puller set with counter stay and sliding hammer K-22-B is used for pulling internal bearings, outer bearing rings, and bushings in crafts, workshops, and industry. The...

The 2-jaw universal puller is used for extracting bearings, gears, and discs in all common sizes for crafts, workshops, and industry. It can loosen any component that sits on a shaft and is freely...

The spreaders for strut and steering components of series 145 are used for the safe and completely damage-free widening of the mountings of struts or steering parts from threads in the automotive and...

The pulling devices of series 15 are used in conjunction with the pulling devices of series 18 for the removal of ball bearings, roller bearings, inner rings, and other flat components in crafts,...

The single-sided, fat-hydraulic nut splitters are used for splitting particularly large, stuck, rusted, or overtightened nuts of quality classes 5, 6, 8, and 10. During this splitting process, the...

The supports of the series 22 are used together with the internal extractors of the series 21 in crafts, industry, and workshops. Supports are particularly well suited for large cylinder bushings and...

The 3-jaw universal puller with quickly adjustable jaws is used for pulling bearings, gears, and discs in all common sizes for craft, workshop, and industry. It allows for loosening any component...

The 3-jaw universal puller with quickly adjustable jaws is used for pulling bearings, gears, and discs in all common sizes for craft, workshop, and industry. It allows for loosening any component...

The 13-piece Universal Puller Set from the 2030 series is used for 2-jaw and 3-jaw pulling of bearings, gears, discs, etc. in craftsmanship, industry, and workshops. The 2030 series impresses with...

The internal extractors of the series 21 are used for pulling out internal bearings, bearing outer rings, and bushings in craftsmanship, workshops, and industry. The multi-shelled design of the...

The 8-piece mechanical nut splitter set K-54-B is used to split stubbornly seized, rusted, or over-tightened nuts of quality classes 5, 6, and 8. During this splitting process, the threaded pin...

The spherical joint extractor with a short hydraulic spindle of series 129 is used to press out particularly stubborn ball pins during the dismantling of ball joints and tie rod ends on medium...

The thread insert set for sliding hammer or counter stays of series 22 is used to pull out parts with central threaded holes in crafts, industry, and workshops. The set includes six different threads...